Manual Scheppach KZS2000 Primaster (page 25 of 56) (English, German, French)

782511

Zoom out

Zoom in

1/56

GB | 25

A.) 90° stop angle (not supplied)

B.) 45° stop angle (not supplied)

C.) Allen key, 6 mm

D.) Allen key, 3 mm

E.) Phillips head screw (Laser)

3. Scope of delivery

• Sliding cross cut mitre saw

• 1 x Clamping device (7) (preassembled)

• 2 x Workpiece support (8) (preassembled)

• Sawdust bag (17)

• Allen key 6 mm (C)

• Allen key 3 mm (D)

• Sawblade (mounted)

• Operating manual

4. Intended use

The sliding cross cut mitre saw is designed to cross-

cut wood and plastic respective of the machine’s size.

The sliding cross cut mitre saw is not designed for

cutting rewood.

Warning! Do not use the sliding cross cut mitre saw

to cut materials other than those specied described

in manual.

Warning! The supplied saw blade is intended exclu-

sively for sawing the following materials:

wood, wood-derived products (MDF, chipboard, ply-

wood, blockboard, hardboard, etc.), wood with nails

and 3 mm mild steel plates.

Note: Wood containing non-galvanised nails or

screws can also be safely cut when carefully handled.

Note: Do not use the saw blade to cut galvanised ma-

terials or wood containing galvanised nails. Do not

use the saw blade to saw rewood!

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse. The user / operator and not the manufacturer

will be liable for any damage or injuries of any kind

caused as a result of this.

The equipment is to be operated only with suitable

saw blades. It is prohibited to use any type of cutting-

o󰀨 wheel.

To use the equipment properly you must also observe

the safety information, the assembly instructions and

the operating instructions to be found in this manual.

All persons who use and service the equipment have

to be acquainted with this manual and must be in-

formed about the equipment’s potential hazards. It is

also imperative to observe the accident prevention

regulations in force in your area. The same applies

for the general rules of health and safety at work.

The manufacturer will not be liable for any changes

made to the equipment nor for any damage result-

ing from such changes. Even when the equipment is

used as prescribed it is still impossible to eliminate

certain residual risk factors. The following hazards

may arise in connection with the machine’s construc-

tion and design:

• Contact with the saw blade in the uncovered saw

zone.

• Reaching into the running saw blade (cut injuries).

• Kick-back of workpieces and parts of workpieces.

• Saw blade fracturing.

• Catapulting of faulty carbide tips from the saw

blade.

• Damage to hearing if ear-mu󰀨s are not used as

necessary.

• Harmful emissions of wood dust when used in

closed rooms.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial

applications. Our warranty will be voided if the equip-

ment is used in commercial, trade or industrial busi-

nesses or for equivalent purposes.

5. Safety information

General power tool safety warnings

m WARNING! Read all safety warnings, instruc-

tions, illustrations and specications provided

with this power tool. Failure to follow all instructions

listed below may result in electric shock, re and/or

serious injury.

Save all warnings and instructions for future ref-

erence.

The term “power tool” in the warnings refers to your

mains-operated (corded) power tool or battery-oper-

ated (cordless) power tool.

1. Work area safety

a) Keep work area clean and well lit. Cluttered or

dark areas invite accidents.

b) Do not operate power tools in explosive at-

mospheres, such as in the presence of am-

mable liquids, gases or dust. Power tools cre-

ate sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while op-

erating a power tool. Distractions can cause you

to lose control.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KZS2000 Primaster in the language / languages: English, German, French as an attachment in your email.

The manual is 3.77 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach KZS2000 Primaster Manual

Product: