Manual Scheppach KS55PS Kity (page 17 of 72) (English, German, French, Italian, Portuguese, Spanish)

782280

Zoom out

Zoom in

1/72

17GB

• The machine may only be used, maintained, and

operated by persons familiar with it and instructed

in its operation and procedures. Arbitrary alterations

to the machine release the manufacturer from all

responsibility for any resulting damages.

• The machine may only be used with original acces-

sories and tools made by the manufacturer.

• The machine may not be operated with sanding

belts

m Please note that our equipment has not been de-

signed for use in commercial, trade or industrial ap-

plications. Our warranty will be voided if the machine

is used in commercial, trade or industrial businesses

or for equivalent purposes.

5. Safety instructions

General safety instructions for power tools

Warning

Read all warnings and instructions.

Failure to apply all warnings and instructions can lead

to electrical shock, re and/or serious injury.

Keep all warnings and instructions handy for fu-

ture consultation.

The term “power tool” used in the warnings refers to

power tools that are connected to a source of electri-

cal energy (with an electrical cable)

1) Workplace safety

a.) Keep your working area clean and well lit. Clut-

tered or dimly lit workspaces can lead to acci-

dents.

b.) Do not operate power tools in areas where explo-

sions could take place, or in which ammable liq-

uids, gases or dust are present. Power tools can

create sparks, which can cause dust or fumes to

ignite.

c.) Keep children and bystanders away from the pow-

er tool when it is being used. Distractions could

cause you to lose control over the equipment.

2) Electrical safety

a.) The terminal plug of the tool must t into the out-

let. The plug may not be modied in any way. Do

not use an adaptor plug together with grounded

power tools. The original plugs and the appropri-

ate outlets reduce the risk of an electrical shock.

b.) Avoid contact with grounded surfaces, such as

pipes, radiators, stoves and refrigerators. There

is an increased risk of electrical shock, if your

body is grounded.

c.) Keep power tools away from rain or wet condi-

tions. Penetration of water into the power tool in-

creases the risk of electrical shock.

d.) Do not use the cable for any purpose other than

that for which it was made. Do not use it to carry the

tool, hang it up, or to pull the plug out of the outlet.

Keep the cable away from heat, oil, sharp cor-

ners or parts of the equipment that move.

Damaged or entangled cords increase the risk of

electrical shock.

e.) When operating the power tool outdoors, only

use extension cords that are suitable for outdoor

use. The use of an appropriate extension cord re-

duces the risk of an electrical shock.

f.) If the power tool must be used in a damp envi-

ronment, use a residual current protective device.

The use of such a device reduces the risk of elec-

trical shock.

Warning! This electric tool generates an electromag-

netic eld during operation. This eld can impair active

or passive medical implants under certain conditions.

In order to prevent the risk of serious or deadly in-

juries, we recommend that persons with medical

implants consult with their physician and the manu-

facturer of the medical implant prior to operating the

electric tool.

3) Personal safety

a.) Be attentive, watch what you are doing and use

the power tool sensibly. Do not use power tools

when you are tired or under the inuence of

drugs, alcohol or medicines. One moment of inat-

tention while using a power tool can result in seri-

ous injury.

b.) Wear personal protective equipment and always

wear protective glasses. Wearing personal pro-

tective equipment, such as a dust mask, slip-free

safety shoes, protective headwear or ear protec-

tion, depending on the type and use of a power

tool reduces the risk of injury.

c.) Avoid unintentional start-ups. Make sure that the

power tool is shut off before it is connected to the

power supply, or is carried. If you have your nger

on the switch of the tool while carrying it, or have

the tool turned on, or connected to a power sup-

ply, this behaviour can lead to accidents.

d.) Remove the adjustment aides or the spanners

before turning on the power tool. A tool or wrench

that is located in a rotating part of the machine,

can lead to injuries.

e.) Avoid abnormal posture. Make sure that the oper-

ator is standing rmly and can maintain balance.

This allows the operator to maintain control over

the power tool in unexpected situations.

f.) Wear appropriate clothing. Do not wear loose

clothing or jewellery. Keep hair, clothing and

gloves away from the moving parts. Loose cloth-

ing, jewellery or long hair can get caught in the

moving parts.

g.) If dust vacuums or catching systems can be in-

stalled on the tool, make sure that these are cor-

rectly connected and assembled. The use of a dust

exhaust unit can reduce hazards caused by dust.

4) Use and treatment of the power tool

a.) Do not overtax the tool. Use the appropriate tool

for the work that is to be done. With the correct

power tool, you can work better and more safely.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KS55PS Kity in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 4.31 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach KS55PS Kity Manual

Product: