781409
20
Zoom out
Zoom in
Previous page
1/156
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
20 |
Safety instructions for cut-o󰀨 machines
1) Cut-o󰀨 machine safety warnings
a. Position yourself and bystanders away from
the plane of the rotating wheel. 
hood is intended to protect the operator from frag-
      

b. Use only bonded reinforced or diamond cut-
o󰀨 wheels for your power tool. Just because an


c. The rated speed of the accessory must be at
least equal to the maximum speed marked on
the power tool.    
󰀨
d. Wheels must be used only for recommended
applications. For example: do not grind with
the side of a cut-o󰀨 wheel.Wheels must be
used only for recommended applications. For
example: do not grind with the side of a cut-o󰀨
wheel.󰀨


e. Always use undamaged wheelanges that are
of correct diameter for your selected wheel.
-

f. The outside diameter and the thickness of your
accessory must be within the capacity rating
of your power tool.

g. Grinding discs andanges must t exactly on
your electrical tool’s grinding spindle. Inser-



h. Do not use damaged wheels. Before each use,
inspect the wheels for chips and cracks. If the
power tool or wheel is dropped, inspect for
damage or install an undamaged wheel. After
inspecting and installing the wheel, position
yourself and bystanders away from the plane
of the rotating wheel and run the power tool at
maximum no load speed for one minute. Dam-


i. Wear personal protective equipment. Depend-
ing on application, use face shield, safety gog-
gles or safety glasses. As appropriate, wear
dust mask, hearing protectors, gloves and
shop apron capable of stopping small abrasive
or workpiece fragments.

     

-

4) Using and handling the electric tool
a) Do not overload the electric tool. Use the elec-
tric tool intended for your work. The suitable
 

b) Do not use an electric tool whose switch is de-
fective. 
󰀨
c) Remove the plug from the socket and/or take
out a removable battery before setting the
device, changing insertion tool parts or put-
ting the electric tool away. 


d) Keep unused electric tools out of the reach
of children. Do not let people use the electric
tool who are not familiar with it or who have
not read these instructions. Electric tools are
-

e) Maintain electric tools and tool attachments
with care. Check whether moving parts func-
tion properly and do not get stuck and wheth-
er parts are broken or are damaged and thus
adversely a󰀨ect the electric tool function.
Have damaged parts repaired before using
the electric tool. 

f) Always keep cutting tools sharp and clean.
-
ting edges seize up less often and are easier to

g) Use electric tools, accessories, insertion tool,
etc. according to these instructions. Take the
working conditions and the activity to be car-
ried out into consideration. 
for applications other than the intended uses can

h) Keep the handles and gripping surfaces dry,
clean and free of oil and grease.
     
safe operation and control of the electrical tool in

5) Service
a) Only have your electric tool repaired by quali-
ed specialists and only with original spare
parts. 

20


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach KS1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KS1200 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish, Finnish as an attachment in your email.

The manual is 5.77 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Scheppach KS1200

Scheppach KS1200 User Manual - English, German, French, Italian, Polish, Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info