782080
72
Zoom out
Zoom in
Previous page
1/80
Next page
71
10. MALFUNCTION REMEDIES
GB
- Vibrations and noise of the machine - Elements not locked (adjusting hand wheel, locking lever,
handles or other fences and stop)
- Check tool tensioning
- Cutter blades badly sharpened or blunt
- The machine does not stand safely. Fix it to the ground
- Have the ball bearings replaced if they are too loud
- Check the belt tensioning
- The cutting action turns the wood
black
- The tools are badly sharpened
- The tools are incorrectly fitted. Observe the turning direction
- Rapid wear of the tool - The tools are badly sharpened
- The feeding speed is too high
- Do not force the feed
- Push the work piece without jerks
- The wood is dirty (cement, sand, nails...)
- The motor get exceptionally hot - Have the motor checked by a specialist if it cannot be touched
any more by hand
- The motor frequently cuts off - Have it checked by a specialist
- The machine squeezes - Cutting height too high. Reduce the height and make
several passages.
- Feeding speed too high
- Tools worn. Replace or sharpen them
- The mobile elements only move hea-
vily
- Clean the gear wheels, axles, and grease them, if needed
- Regularly clean the threaded spindles and remove dirt or
grease mixed with sawdust,
- Check wether the machine doors are well closed
- The knob for switching off is locked
- The machine does not start - Check whether the fuses of the switchbox are allright
- Check the positon of the guards
- The knob for switching off is locked
- Check that handles move fix
- The work is exceptionally slow - Check sharpness of cutters
- The tables and feeder rollers are dirty
- Check the belt tensioning
- formation of a heel or nonright part
after planing
- Cutters are higher settled than the outfeed table
- Bad presentation or reception of the piece of wood
72


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach KITY 439 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KITY 439 in the language / languages: English, German, French as an attachment in your email.

The manual is 1.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info