782080

Scheppach KITY 439 Manual

27
Zoom out
Zoom in
Previous page
1/80
Next page
DGB
26
6. INBETRIEBNAHME DER MASCHINE
1. Montage des Bohrfutters (11)
2. Montage des Langlochsbohreinrichtung (12)
g. Montage des Sonderausrüstung
f. Montage der Grundausrüstung
4. Aufbewahrung des Schiebestockes und Absaugstutzens (10)
6. PUTTING THE MACHINE INTO OPERATION
1.Fitting the chuck (11)
- Mount the thicknessing table (D) by means of the hand
wheel (M1)through the holes of the housing until the 2 holes
across in relation to the mortiser appear.
- Insert the 2 axles of the mortising attachment into the 2 holes
of the thicknessing table (D).
- Fasten the mortising attachment by slightly tightening the 2
bolts from underneath the thicknessing table, in order not to
damage the under side of the table (see detail).
- Remove the drill spindle cover by releasing the bolt (I).
- Remove the nut (J) of the motor spindle of the drill chuck.
- Fix the chuck (L) on the motor spindle (by unscrewing it).
(12)
Note : the washer (K) must remain on the motor spindle.
2. Fitting the mortiser (12)
g. Fitting the optional equipment
f. Assembly of the series elements
4. Storing the push stick and the suction connection (10)
- The push stick is to be hooked on the machine housing.
- Das Schiebeholz wird an der Maschine aufgehängt.
- Entfernen Sie die Bohrspindelabdeckung durch Lösen der
Schraube (I).
- Entfernen Sie die Mutter (J) des Motorpindels des
Bohrfutters.
- Befestigen Sie das Bohrfutter (L) auf den Motorspindel
(durch Aufschrauben). (12)
Bemerkung : Die Scheibe (K) muß unbedingt auf dem
Motorspindel bleiben.
- Fahren Sie den Dickentisch (D) mithilfe des Handrades (M1)
hoch, bis die 2 Löcher quer zum Langloch erscheinen.
- Fügen Sie die 2 Achsen der Langlochbohreinrichtung in die
2 Löcher des Dickentisches ein (D).
- Befestigen Sie die Langlochbohreinrichtung durch leichtes
Anziehen der 2 Schrauben, die sich unter dem Dickentisch
befinden, um die Tischunterseite nicht zu beschädigen (siehe
Detail).
… 27 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach KITY 439 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach KITY 439 in the language / languages: English, German, French as an attachment in your email.

The manual is 1.83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info