644554

Scheppach HSC130 Manual

16
Zoom out
Zoom in
Previous page
1/24
Next page
Transport / Storage
Transport::
• Push the retaining bolt (Fig.2, Pos.1)
through the hole in the cutting lever
(Fig.2, Pos.2) and through the base
frame (Fig.2, Pos.3) of the block
splitter.
• Lift the block splitter by the extension
bar (Fig.2, Pos.4) and transport it by
means of the transport wheels (Fig.2,
Pos.5).
Storage::
• Clean the block splitter thoroughly
before you store it.
• Make sure that the block splitter is
stored in a dry place.
Setup
• Setuptheblocksplitteronarm,level
base.
• Mark the breaking point on the stone
piece (Fig.3, Pos.1) with a pencil.
• Place the stone piece (Fig.3, Pos.1)
in the centre of the support (Fig.3,
Pos.2) of the block splitter.
• Adjust the height of the upper blade
(Fig.3, Pos.4) with the setting spindle
(Fig.3, Pos.5) such that the cutting
lever with extension bar (Fig.3, Pos.3)
stands approx. 15° above the hori-
zontal when the upper blade (Fig.3,
Pos.5) lies on the stone piece.
• Check whether the position of the
upper blade (Fig.3, Pos.4) matches
up with the position of the denoted
breaking point.
• Press the cutting lever with extension
bar (Fig.3, Pos.3) with light to medium
force downward toward the stone
piece. The stone piece breaks along
the breaking point.
• Remove all breakage remnants from
the components of the block splitter.
Turning the upper and lower blades
• When changing the blades, remove
the screws (Fig.4, Pos.1) as needed
on the upper or lower blade (Fig.4,
Pos.2) with a Phillips screwdriver.
• Remove the upper or lower blade as
needed (Fig.4, Pos.2).
• Turn the removed blade and replace
it in the block splitter such that an
unworn blade edge forms the new
cutting edge.
• Screw all screws (Fig.4, Pos.1) back
into place.
Maintenance and Repairs
• Maintain the device regularly to ensure
the error-free function.
• In the case of problems, place the
device out of service immediately and,
if necessary, have it repaired by an
authorized specialist.
• Perform a visual check of the block
splitter before every use.
• After every use of the block splitter,
remove trash and stone remnants.
• Lubricate or oil all moving parts regu-
larly with grease or motor oil.
GB
GB
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HSC130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HSC130 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info