644554
13
Zoom out
Zoom in
Previous page
1/24
Next page
Manufacturer
scheppach Fabrikation von
Holzbearbeitungsmaschinen GmbH
D-89335 Ichenhausen
Package contents
Block splitter with upper and lower blades
Extension bar for cutting lever
Technical Data
Model HSC130
Maximum cutting width 330 mm
Minimum cutting height 26 mm
Maximum cutting height 140 mm
Adjustment of cutting height manual
Weight 41 kg
Technical changes reserved
General notes
1. After unpacking, check all parts for
possible transport damages. In the
case of complaints, the carrier must
benotiedatonce.
2. Later claims are not recognized.
3. Check the delivery for completeness.
4. Familiarize yourself with the machine
by means of the operating instructions
prior to installation.
5. For accessories as well as expenda-
ble and replacement parts, use only
original parts. Obtain replacement
parts from your dealer.
6. When ordering, give our article
numbers as well as the type and
model year of the device.
Note:
According to the applicable product liability
law, the manufacturer
of this device is not liable for damages
occurring to or through use of this device
in the case of:
• improper handling,
• failure to observe the operating inst-
ructions,
• repairs by unauthorized specialists,
• installation and exchange of repla-
cement parts that are not original,
inappropriate use.
We recommend:
Before installation and startup, read
the entire text of the operating instruc-
tions.
These operating instructions should make
it easier
to familiarize yourself with your machine
and to use its intended installation options.
The operating instructions contain impor-
tant
notes on how to work with the machine
safely, correctly and economically and on
how to avoid danger, save repair costs,
minimize downtimes and increase the reli-
ability and operating life of the machine.
In addition to the safety requirements of
these operating instructions, it is absolute-
GB
GB
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HSC130 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HSC130 in the language / languages: English, German, French as an attachment in your email.

The manual is 1,88 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info