781860
26
Zoom out
Zoom in
Previous page
1/52
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26 GB
Do not allow other persons, especially children, to
touch the tool. Keep them out of your work area.
Persons working on the machine should not be
distracted.
Note the direction of rotation of the motor and saw
blade. Use only blades whose permissible maxi-
mum speed is not lower than the maximum spindle
speed of the circular saw and of the material to
be cut.
After you have switched off the motor, never slow
down the saw blade by applying pressure to its
side.
Onlyt blades which are well sharpened and have
no cracks or deformations.
Do not use circular saw blades made of high-speed
alloy steel (HSS steel)
Only use saw blades that are recommended by the
manufacturer, comply with EN 847-1.
Faulty saw blades must be replaced immediately.
Never use saw blades which do not comply with
the data specied in this manual.
Never dismantle the machines safety devices or
render them inoperative.
If the table insert is worn, replace it.
Always stand to the side of the saw blade when
working with the saw.
Never load the machine so much that it cuts out.
Make sure that off-cuts do not catch on the saw
blade crown.
Never remove loose splinters, chips or jammed
pieces of wood when the saw blade is running.
To rectify faults or remove jammed pieces of wood,
always switch off the machine rst. - Unplug the
power plug -
If the sawing gap is worn, replace the table insert.
Switch off the machine and pull out the mains plug.
Carry out retooling work, adjustments, measure-
ments and cleaning jobs only when the motor is
switched off.
- Unplug the power plug -
Before switching on, make sure that all keys and
wrenches have been removed from the tool.
Switch off the motor and unplug the power plug
before you leave the workplace
Ret all guards and safety devices immediately
after you have completed any repairs or mainte-
nance work.
Be sure to observe the safety information and op-
erating and maintenance instructions issued by the
manufacturer, as well as the dimensions listed in
the Technical Data.
It is imperative to observe the accident prevention
regulations in force in your area as well as all other
generally recognized rules of safety.
Make sure you stand squarely and keep your bal-
ance at all times.
Each time before re-using the tool, carefully check
that the guards or any slightly damaged parts are
working as intended.
Check the tool for damage!
Protective devices or other parts with minor dam-
age must be carefully inspected to ensure that they
function correctly and as intended prior to contin-
ued use of the tool.
Check that the moving parts are in good working
order, that they do not jam, and that no parts are
damaged. Make sure that all parts are tted cor-
rectly and that all other operating conditions are
properly fullled.
Unless otherwise stated in the operating instruc-
tions, damaged safety devices and parts must
be repaired or replaced by an authorized service
center.
This tool conforms to the applicable safety regula-
tions. Repairs may only be performed by a special-
ist using original spare parts. Otherwise accidents
could occur.
If necessary, wear suitable personal protection
equipment. This could consist of:
- Ear plugs to prevent the risk of damaging your
hearing;
- A breathing mask to avoid the risk of inhaling
hazardous dust.
- Eye protection to prevent foreign bodies entering
the eyes.
- Safety shoes for stability and protection against
falling objects.
- Always wear gloves when handling saw blades
and rough materials. Whenever practicable, saw
blades must be carried in a container.
- Safety goggles / face protection to avoid injuries
due ying objects.
- Protective clothing to prevent cutting injuries.
The operator must be informed about the condi-
tions that inuence the generation of noise (for
example saw blades designed to reduce noise
emissions, caring for blades and the machine).
Faults on the machine or its guards, safety devices
and blade must be reported to the person in charge
as soon as they are discovered.
Use only the transport devices to move the ma-
chine. Never use the guards for handling and mov-
ing the machine.
All operators must receive proper training in the
use, adjustment and operation of the machine.
Do not saw any materials that contain foreign bod-
ies such as wires, cables or ties.
Only use sharp saw blades.
Warning! This electric tool generates an electro-
magnetic eld during operation. This eld can im-
pair active or passive medical implants under certain
conditions. In order to prevent the risk of serious
or deadly injuries, we recommend that persons with
medical implants consult with their physician and the
manufacturer of the medical implant prior to operating
the electric tool.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HS520 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HS520 in the language / languages: English, German, French as an attachment in your email.

The manual is 8.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info