781861
25
Zoom out
Zoom in
Previous page
1/224
Next page
25
Workpieces must be completely free of
foreign objects, i.e. nails or screws.
The circular sawbench is designed ex-
clusively for the machining of wood and
materials similar to wood. Only original
Scheppach tools and accessories may
be used. Use the required sawblade
in accordance with the EN 847-1 norm
depending on the type of cut and type
of wood (solid wood, plywood or chip-
board). Please observe the „Special Tool
Accessories“.
The machine must only be used in tech-
nically perfect condition in accordance
with its designated use and the instruc-
tions set out in the operating manual,
and only by safety-conscious persons
who are fully aware of the risks involved
in operating the machine. Any functional
disorders, especially those affecting the
safety of the machine, should therefore
be rectied immediately.
Relevant accident prevention regulations
and other, generally recognized safety-
technical rules must also be adhered to.
The Scheppach machine may only be
used, maintained, and operated by per-
sons familiar with it and instructed in
its operation and procedures. Arbitrary
alterations to the machine release the
manufacturer from all responsibility for
any resulting damages.
The Scheppach machine may only be
used with original accessories and origi-
nal tools made by the manufacturer.
Any other use exceeds authorization.
The manufacturer is not responsible for
any damages resulting from unauthor-
ized use; risk is the sole responsibility of
the operator.Remaining hazards.
An d’éviter les risques d’accident, aucun
corps étranger ne doit se trouver autour
du poste de travail et aux alentours de
la machine.
En principe, les pièces à usiner doivent
être exemptes de corps étrangers,
comme par exemple, des clous ou des
vis.
La scie circulaire est exclusivement
conçue pour travailler le bois ou des
matériaux dérivés du bois. Il est impératif
d’utiliser exclusivement des outils et des
accessoires d’origine. Suivant la coupe
et le bois utilisé (bois massif, contrepla-
qué ou panneaux d’agglomérés), utili-
ser la lame de scie appropriée suivant
la norme EN 847-1. Veuillez prendre en
considération les accessoires d’outillage
spéciaux qui sont spéciés à la n de ce
mode d’emploi.
Utiliser la machine uniquement
lorsqu’elle est en parfait état du point de
vue technique et conformément à son
emploi prévu en observant les instruc-
tions de service, en tenant compte de
la sécurité et en ayant conscience du
danger! Eliminer notamment (ou faire
éliminer) immédiatement toute panne
susceptible de compromettre la sécurité!
Lors de l’utilisation de l’equipement spé-
cial , le manuel d’utilisation y joint doit
être lu avec soin et suivi à la lettre.
Respecter les consignes de prévention
antiaccidents appropriées, ainsi que les
autres règles de sécurité techniques
reconnues en général.
Utilisation, entretien, mise en condition
de la machine uniquement par des per-
sonnes familiarisées et qui sont infor-
mées des dangers inhérents. Toute
initiative de modication de la machine
exclut la responsabilité du constructeur
pour les dommages y faisant suite.
La machine doit être utilisée uniquement
avec des accessoires et des outils d’ori-
gine du constructeur.
Tout autre genre d’utilisation est consi-
déré comme non conforme. Le construc-
teur nassume pas de responsabilité en
cas de dommages dans ce cas; le risque
est à la charge de l’utilisateur seul.
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
25


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HS410 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HS410 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 17.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info