781485
9
Zoom out
Zoom in
Previous page
1/272
Next page
9
Drive
Motor V/Hz 230 V/50 Hz 400 V/50 Hz
Performance input
P1 2200 W 2800 W
Operation mode S 6/40 % S 6/40 %
Number of
revolutions 2800 1/min 2760 1/min
Motor protection yes yes
Undervoltage
cutback yes yes
Connector Schuko CEE 16 A
Subject to technical changes!
Noise characteristic values
Measurement conditions
The values stated are emission values and are therefore
not necessarily safe operating values. Although there is
a correlation between emission and immission levels,
you cannot reliably deduce from this whether additional
safety measures are required or not. Factors which can
influence the immission level currently at the workstation
comprise the duration of the effects, the characteristics
of the work room, other sources of noise etc., for exam-
ple, the number of machines and adjacent operations.
The permissible values per workstation can also vary from
country to country. This information should nevertheless
enable the user to make a better estimation of dangers
and risks.
Sound level in dB
Operation LWA = 112,4 dB(A)
Sound level at the workplace in dB
Operation LpAeq = 102.5 dB(A)
A measurement uncertainty allowance K = 4 dB applies
to the mentioned emission values.
Information on dust emission
The dust emission values measured in accordance with
the „principles for testing dust emission“ of the commit-
tee of experts of wood are below 2 mg/m3. This means
that the TRK limit for wood dust which is valid in the
Federal Republic of Germany will be permanently kept
to if the machine is connected to a properly working dust
extractor with at least 20 m/s air speed.
Use hearing or ear protection.
Use protective mask and
goggles.
Use eye protection.
Napęd
Silnik V/Hz 230 V/50 Hz 400 V/50 Hz
Moc pobierana P1 2200 W 2800 W
Tryb pracy S 6/40 % S 6/40 %
Liczba obrotów 2800 1/min 2760 1/min
Osłona silnika tak tak
Zabezpieczenie
przed spadkiem
napięcia tak tak
Gniazdo wejścia
Schuko (
gniazdo wtykowe
ze stykiem
ochronnym
CEE 16 A
Wprowadzanie zmian technicznych zastrzeżone!
Parametry głośności
Zasady pomiaru
Podawane wartości wartościami emisyjnymi i nie
muszą jednocześnie przedstawiać bezpiecznych
wartości pracy.
Mimo istnieje związek między poziomem emisyjnym i
imisyjnym, to nie można jednoznacznie stwierdzić, czy
dodatkowe środki ochronne konieczne, czy też nie.
Do czynników, które mogą mieć wpływ na istniejącą
imisję w miejscu pracy, można też zaliczyć: długość
oddziaływania, właściwości pomieszczenia pracy, inne
źródła hałasu, itp., jak na przykład liczba maszyn czy
sąsiednie procesy. Dopuszczalne wartości pracy różnią
się w zależności od krajów. Powyższe informacje powinny
ułatwić użytkownikowi lepszą ocenę ryzyka i zagrożenia.
Poziom mocy akustycznej w dB
Poddane obróbce LWA = 112,4 dB (A)
Wartości emisyjne dB na stanowisku pracy
Poddane obróbce LpAeq= 102,5 dB (A)
Dla określonych wartości emisyjnych stosuje się
poprawkę środowiskową uwzględniającą hałas tła
wynoszącą K = 4 dB
Informacje dotyczące emisji pyłu
Zgodnie z przepisami regulującymi ilość emisji pyłu
(parametry jego stężenia) podczas pracy z maszynami
obrabiającymi drewno, poziom emisji pyłów drzewnych
musi wynosić poniżej 2 mg/m3. Podłączenie sprzętu do
sprawnie działającego ltra pracującego z prędkością
strumienia powietrza, co najmniej 20 m/s, zapewnia
przestrzeganie obowiązujących na terenie Republiki
Federalnej Niemiec norm dotyczących limitu pyłu
drzewnego.
Stosować ochronę słuchu. Względnie
ochraniacze na uszy.
Stosować maski ochronne i okulary
ochronne.
Używać ochraniaczy na oczy.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HS1200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HS1200 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info