Manual Scheppach HS120 (page 25 of 264) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish)

782520

Zoom out

Zoom in

1/264

Fig. 9

Fasten the wheel assembly (16) to the rear base legs (4

and 5) using 4 hexagon bolts M6 x 16, 4 washers 6, and

4 nuts M6.

Tighten the bolts slightly by hand.

Fig. 10

Place the machine on its feet and ﬁrmly tighten all bolts

of table, legs and braces (except those of the wheel as-

sembly).

Fig. 11

Firmly tighten the wheel assembly in the position where

the wheels slightly touch the ground.

Fig. 12 / 12.1

Fasten the riving knife in line with the saw blade as de-

scribed in the illustration. Slightly release the bolt without

removing it. Retighten it ﬁrmly after resetting. For doing

this, it is necessary to remove the saw blade insert (19,

Fig. 13).

Fig. 9

Monter le dispositif de déplacement 16 sur les pieds de

bâti arrières 4 et 5, en utilisant 4 vis à six pans creux M

6 x 16, 4 rondelles 6 et 4 écrous M 6. Serrer légèrement

les vis à la main

Fig. 10

Poser la machine sur les pieds, serrer à fond toutes les vis

de la table, des pieds et des renforcements (mis à part le

dispositif de déplacement).

Fig. 11

Serrer à fond le dispositif de déplacement dans telle

position que les roues soient légèrement en contact avec

le sol.

Fig. 12 /12.1

Monter le coin à refendre par rapport à la lame de scie

comme montré dans la ﬁgure. Desserrer légèrement la vis

(ne pas la sortir complètement) la resserrer à fond après

le réglage. L’insert de lame de scie 19, Fig. 13, doit alors

être retiré.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HS120 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HS120 Manual

Product: