782520

Scheppach HS120 Manual

9
Zoom out
Zoom in
Previous page
1/264
Next page
9
Measurement conditions
The values stated are emission values and are therefore
not necessarily safe operating values. Although there is a
correlation between emission and immission levels, you
cannot reliably deduce from this whether additional safety
measures are required or not. Factors which can influence
the immission level currently at the workstation comprise
the duration of the effects, the characteristics of the work
room, other sources of noise etc., for example, the num-
ber of machines and adjacent operations. The permissible
values per workstation can also vary from country to coun-
try. This information should nevertheless enable the user
to make a better estimation of dangers and risks.
Sound level in dB
Operation LWA = 112,4 dB(A)
Sound level at the workplace in dB
Operation LpAeq = 102.5 dB(A)
A measurement uncertainty allowance K = 4 dB applies to
the mentioned emission values.
Information on dust emission
The dust emission values measured in accordance with
the „principles for testing dust emission“ of the commit-
tee of experts of wood are below 2 mg/m3. This means
that the TRK limit for wood dust which is valid in the
Federal Republic of Germany will be permanently kept
to if the machine is connected to a properly working dust
extractor with at least 20 m/s air speed.
Use hearing or ear protection.
Use protective mask and
goggles.
Use eye protection.
mIn these operating instructions we have marked the
places that have to do with your safety with this sign.
m Safety notes
Attention! The following basic safety measures must be
observed when using electric tools for protection against
electric shock, and the risk of injury and fire.
Read all these notices before using the electric tool and
keep the safety instructions for later reference.
Paramètres du bruit
Conditions de mesure
Les valeurs indiquées sont des valeurs d’émission et, par
conséquent, ne représentent pas nécessairement des va-
leurs sans risques pour le lieu de travail. Bien qu’il existe
une corrélation entre les niveaux d’émission et les niveaux
d’immission, l’on ne peut en déduire avec certitude si des
mesures de précaution supplémentaires seront néces-
saires ou non. Les facteurs susceptibles d’influences, la
particularité des locaux de travail, d’autres sources de
bruit, etc., comme par exemple, le nombre de machines
et des opérations effectuées à proximité.
Les valeurs de bruit admissibles pour les postes de travail
peuvent également varier d’un pays à l’autre. Néanmoins,
cette information a pour but de permettre à l’utilisateur,
d’effectuer une meilleure évaluation des dangers et des
risques.
Niveau de puissance acoustique indiqué en dB
Usinage LWA = 112,4 dB(A)
Niveau de pression acoustique au poste de travail indiqué
en dB
Usinage LpAeq = 102,5 dB(A)
Un supplément d’incertitude de mesure K = 4 dB est
valable pour les valeurs d’émission citées
Données concernant les émissions de poussière
Les valeurs d’émission de poussière mesurées selon les
„Principes du contrôle des émissions de poussière (para-
mètre de concentration) des machines à travailler le bois“
de la commission des professionnels du Bois, sont infé-
rieures à 2 mg/m3. Ceci permet de partir du principe que
le raccordement de la machine à un dispositif d’aspiration
de l’entreprise dont la vitesse de circulation d’air s’élève
au minimum à 20m/sec, permettra de respecter durable-
ment, et de façon sûre, la valeur limite TRK en vigueur en
Allemagne pour la poussière de bois.
Utiliser des protections
auriculaires
Utiliser masque et lunettes de
protection
Utiliser une protection pour
les yeux
m
Dans ce guide d’utilisation, nous avons repéré les
endroits relatifs à votre sécurité avec ce signe.
m Conseils de sécurité
AVERTISSEMENT ! Lors de l’utilisation d’outils élec-
triques, il convient de toujours respecter les consignes
de sécurité de base afin de réduire le risque de feu, de
choc électrique et de blessure des personnes, y compris
les consignes suivantes.
… 9 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HS120 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HS120 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 9.4 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info