Manual Scheppach HM90LXU (page 20 of 80) (English, German, French, Italian, Portuguese, Spanish)

782505

Zoom out

Zoom in

1/80

20 GB

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

We hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spa-

re parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

Read through the complete text in the operating inst-

ructions before installing and commissioning the de-

vice. The operating instructions are intended to help

the user to become familiar with the machine and

take advantage of its application possibilities in ac-

cordance with the recommendations. The operating

instructions contain important information on how to

operate the machine safely, professionally and eco-

nomically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regu-

lations that apply for the operation of the machine in

your country. Keep the operating instructions packa-

ge with the machine at all times and store it in a plas-

tic cover to protect it from dirt and moisture. Read the

instruction manual each time before operating the

machine and carefully follow its information. The ma-

chine can only be operated by persons who were ins-

tructed concerning the operation of the machine and

who are informed about the associated dangers. The

minimum age requirement must be complied with.

In addition to the safety requirements in these opera-

ting instructions and your country’s applicable regu-

lations, you should observe the generally recognized

technical rules concerning the operation of woodwor-

king machines.

We cannot accept any liability for damage or acci-

dents which arise due to a failure to follow these inst-

ructions and the safety instructions.

2. Layout (Fig. 1-21)

1 Handle

2 Release lever

3 ON/OFF switch

4 Machine head

5 Movable blade guard

6 Saw blade

7 Clamping device

8 Workpiece support

9 Locking screw for workpiece support

10 Table insert

11 Locking screw for turntable

12 Locking lever for xed angle

13 Pointer

14 Scale

15 Turntable

16 Fixed saw table

17 Stop rail

18 Sawdust bag

19 Scale

20 Pointer

21 Locking screw for drag guide

22 Drag guide

23 Locking screw

24 Fastening bolt

25 Screw for cutting depth limiter

26 Stop for cutting depth limiter

27 Adjustment screw (90°)

28 Adjustment screw (45°)

29 Flange bolt

30 Outer ange

31 Saw shaft lock

32 Inner ange

33 Laser

34 ON/OFF switch for laser

35 Guide bar

a) 90° stop angle (not supplied)

b) 45° stop angle (not supplied)

c) Hexagon nut

d) Knurled nut

e) Allen key, 6 mm

3. Scope of delivery

• Open the packaging and remove the device ca-

refully.

• Remove the packaging material as well as the pa-

ckaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• If possible, store the packaging until the warranty

period has expired.

ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HM90LXU in the language / languages: English, German, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 5.85 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HM90LXU Manual

Product: