Manual Scheppach HM100MP (page 20 of 236) (English, German, Danish, French, Italian, Polish, Spanish, Finnish)

759296

Zoom out

Zoom in

1/236

20 GB

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment and

success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by the

product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs due

to the non-compliance of the electric regulations and

VDE regulations 0100, DIN 57113 / VDE0113.

WE RECOMMEND:

Read through the complete text in the operating instruc-

tions before installing and commissioning the device.

The operating instructions are intended to help the user

to become familiar with the machine and take advan-

tage of its application possibilities in accordance with the

recommendations. The operating instructions contain

important information on how to operate the machine

safely, professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating in-

structions, you have to meet the applicable regulations

that apply for the operation of the machine in your coun-

try. Keep the operating instructions package with the ma-

chine at all times and store it in a plastic cover to protect

it from dirt and moisture. Read the instruction manual

each time before operating the machine and carefully

follow its information. The machine can only be operated

by persons who were instructed concerning the opera-

tion of the machine and who are informed about the as-

sociated dangers. The minimum age requirement must

be complied with.

2. Layout (Fig. 1-19)

1. Handle

2. ON/OFF switch

3. Release lever

4. Saw shaft lock

5. Machine head

6. Movable blade guard

7. Saw blade

8. Clamping device

9. Workpiece support

10. Locking screw for workpiece support

11. Table insert

12. Indexed position lever

13. Locking lever

14. Pointer

15. Scale

16. Turntable

17. Fixed saw table

18. Stop rail

19. Scale

20. Pointer

21. Sawdust bag

22. Locking screw

23. Locking screw for drag guide

24. Fastening bolt

25. Drag guide

26. Screw for cutting depth limiter

27. Stop for cutting depth limiter

28. Movable stop rail

29. Set screw for moveable stop rail

30. Adjustment screw (90°)

31. Adjustment screw (45°)

32. Flange screw

33. Outer ange

34. Laser

35. ON/OFF switch for laser

36. Battery compartment

37. Battery compartment cover

38. Screw

39. Inner ange

40. Guide bar

41. Spring

42. Switch for switching speeds

a) 90° stop angle (not supplied)

b) 45° stop angle (not supplied)

c) Allen key, 6 mm

3. Scope of delivery

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the pack-

aging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty

period has expired.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HM100MP in the language / languages: English, German, Danish, French, Italian, Polish, Spanish, Finnish as an attachment in your email.

The manual is 9,15 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HM100MP Manual

Product: