Manual Scheppach HL650 (page 9 of 152) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish)

781961

Zoom out

Zoom in

1/152

In these operating instructions we have marked the

places that have to do with your safety with this

sign: m

m General Safety Rules

• Observe all safety instructions and warnings attached

to the machine.

• See to it that safety instructions and warnings at-

tached to the machine are always complete and per-

fectly legible.

• The safety mechanism on the machine may not be re-

moved or disengaged.

• Check all power supplies. Do not use defective lines.

• Before initial operation check to be sure the two-hand-

ed operation is properly functioning.

• Operating personnel must be at least 18 years of age.

Trainees must be at least 16 years of age, but may

only operate the machine under adult supervision.

• Always wear ear protection and work gloves when

working.

• Caution when working: There is a danger to ngers

and hands from the splitting tool.

• For heavy or cumbersome pieces, use the appropriate

working aids for bracing.

• Cleaning, changing and setting of the machine may

only be carried out when the motor is switched o󰀨. Pull

the power supply plug.

• Connection, maintennace and repair work on the elec-

trical installation my be carried out only by qualied

personnel.

• All protection and safety devices must be replaced

after completing repair and maintenance procedures.

• When leaving the work place, switch the motor o󰀨 and

pull the power supply plug.

• Never try to change the two-hand-functionality of your

scheppach machine. Thus you increase the risk of ac-

cidents.

Warning! This electric tool generates an electromag-

netic eld during operation. This eld can impair active

or passive medical implants under certain conditions. In

order to prevent the risk of serious or deadly injuries, we

recommend that persons with medical implants consult

with their physician and the manufacturer of the medical

implant prior to operating the electric tool.

Proper Use

• The machine meets the currently valid EU machine

directive.

• The hydraulic log splitter is designed only for wood

in a horizontal position. Wood may only be split while

horizontal and in the direction of the grain. Dimen-

sions of wood to be split: maximal 52 cm.

Dans ces instructions de service, nous avons mar-

qué les passages relatifs à la sécurité avec le sym-

bole: m

m Consignes de sécurité

• Respecter toutes les consignes de sécurité et toutes

les indications de danger gurant sur la machine et les

maintenir dans un état lisible.

• Ne pas démonter ni ponter le fonctionnement des dis-

positifs de sécurité prévus sur la machine.

• Vérier les conduites de branchement au secteur. Ne

pas utiliser de ls défectueux. Voir Branchement élec-

trique.

• Vérier le bon fonctionnement de la commande à

deux mains avant de mettre la machine en route.

• L‘opérateur doit avoir au moins 18 ans. Des appren-

tis doivent avoir au moins 16 ans, ils doivent toutefois

toujours travailler sous surveillance sur la machine.

• Porter des gants lors de travaux sur la machine.

• Travailler avec prudence: l’outil de fente présente des

risques de blessures pour les doigts et les mains.

• Utiliser des moyens de secours appropriés pour sou-

tenir les pièces lourdes ou peu maniables lors de la

fente.

• Le moteur doit toujours être à l’arrêt pour e󰀨ectuer

des travaux de changement d’outillage, de réglage,

de mesure et de nettoyage. Débrancher le cordon

d’alimentation.

• Les travaux d’installation, de réparation et de main-

tenance sur l’installation électrique sont strictement

réservés aux personnes qualiées.

• Tous les dispositifs de protection et de sécurité doivent

être remontés immédiatement après achèvement des

travaux de réparation et de maintenance.

• Toujours couper le moteur avant de quitter le poste de

travail. Débrancher le cordon d‘alimentation.

Avertissement! Pendant son fonctionnement, cet

outil électrique génère un champ électromagnétique.

Ce champ peut dans certaines circonstances nuire

aux implants médicaux actifs ou passifs. Pour réduire

les risques de blessures graves voire mortelles, nous

recommandons aux personnes porteuses d‘implants

médicaux de consulter leur médecin, ainsi que le fabri-

cant de leur implant avant d‘utiliser l‘outil électrique.

Utilisation conforme

• La machine est conforme à la directive machines CEE

en vigueur.

• La fendeuse à bois hydraulique est uniquement desti-

née à l‘utilisation en position horizontale. Le bois doit

uniquement être fendu à l‘horizontale et dans le sens

des bres. La taille des morceaux de bois ne doit pas

être supérieure à 52 cm.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HL650 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 5.8 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HL650 Manual

Product: