781854
23
Zoom out
Zoom in
Previous page
1/120
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 23
Check electrical connection leads. Do not use any
faulty connection leads.
Before putting into operation check the correct
function of the two-hand control.
Operating personnel must be at least 18 years of
age. Trainees must be at least 16 years of age, but
may only operate the machine under adult super-
vision.
Wear working gloves when working.
Caution when working: There is a danger to ngers
and hands from the splitting tool.
Use adequate supports when splitting heavy or
bulky logs.
Before starting any conversion, setting, cleaning,
maintenance or repair work, always switch off the
machine and disconnect the plug from the power
supply.
Connections, repairs, or servicing work on the elec-
trical equipment may only be carried out by an elec-
trician.
All protection and safety devices must be replaced
after completing repair and maintenance proce-
dures.
When leaving the work place, switch off the ma-
chine and disconnect the plug from the power sup-
ply.
6. Additional safety instructions
The log splitter may only be operated by one per-
son.
Wear protective gear like safety goggles or other
eye protection, gloves, safety shoes etc. to protect
yourself from possible injuries.
Never split logs containing nails, wire, or other for-
eign objects.
Already split wood and wood chips can be danger-
ous. You can stumble, slip or fall down. Keep the
working area tidy.
While the machine is switched on, never put your
hands on moving parts of the machine.
Only split logs with a maximum length of 110 cm.
Warning! This electric tool generates an electromag-
netic eld during operation. This eld can impair ac-
tive or passive medical implants under certain condi-
tions. In order to prevent the risk of serious or deadly
injuries, we recommend that persons with medical
implants consult with their physician and the manu-
facturer of the medical implant prior to operating the
electric tool.
The manufacturer will not be liable for any changes
made to the equipment nor for any damage resulting
from such changes.
The hydraulic log splitter can only be used in a ver-
tical position. Logs may only be split along the di-
rection of the ber. Log dimensions are:
Log lengths 110 cm
Ø min. 10 cm, max. 40 cm
Never split logs in horizontal position or against the
direction of the ber.
Observe the safety, working, and maintenance in-
structions of the manufacturer, as well as the di-
mensions given in the chapter Technical data.
The applicable accident prevention regulations as
well as all generally recognized safety rules must
be adhered to.
Only persons who have been trained in the use of
the machine and have been informed of the various
dangers may work with the machine and service or
repair it. Arbitrary modications of the machine re-
lease the manufacturer from any responsibility for
resulting damage.
The machine may only be used with original acces-
sories and original tools of the manufacturer.
Any other use exceeds authorization. The manu-
facturer is not responsible for any damages result-
ing from unauthorized use; risk is the sole responsi-
bility of the operator.
The machine may be operated only with original parts
and original accessories of the manufacturer.
The safety, work and maintenance instructions of
the manufacturer as well as the dimensions indicat-
ed in the Technical Data section must be adhered to.
Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Safety notes
WARNING: When you use electric machines, al-
ways observe the following safety instructions in
order to reduce the risk of re, electric shock, and
injuries.
Please read all the instructions before you work
with this machine.
Observe all safety notes and warnings attached to
the machine.
See to it that safety instructions and warnings at-
tached to the machine are always complete and
perfectly legible.
Protection and safety devices on the machine may
not be removed or made useless.
Protection and safety devices on the machine may
not be removed or made useless.
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HL3000GM at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HL3000GM in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 6.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info