Manual Scheppach HL1300 (page 23 of 144) (English, German, French, Italian, Polish)

781954

Zoom out

Zoom in

1/144

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 23

8. Unpacking

Open the packaging and remove the device carefully.

Remove the packaging material as well as the pack-

aging and transport bracing (if available).

Check that the delivery is complete.

Check the device and accessory parts for transport

damage.

In case of complaints the dealer must be informed

immediately. Subsequent complaints will not be ac-

cepted.

If possible, store the packaging until the warranty pe-

riod has expired.

Read the operating manual to make yourself familiar

with the device prior to using it.

Only use original parts for accessories as well as for

wearing and spare parts. Spare parts are available

from your specialized dealer.

Specify our part numbers as well as the type and year

of construction of the device in your orders.

m ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plas-

tic bags, lm and small parts! There is a risk of

swallowing and su󰀨ocation!

9. Attachment / Before starting the

equipment

9.1 Mount wheels (g. 2)

Slide the wheel axle Through the drilled hole on the

bottom, rear end of the splitter.

Now insert the wheels (14) on the wheel axle and fas-

ten them with two splints.

9.2 Mount controller handles (g. 3)

Insert the controller arm (2) with slotted hole onto the

rocker switch (b) and the drilled hole onto the thread-

ed rod (a) .

Secure the controller arm (2) with a washer and fas-

ten it with a spring splint pin on the rocker switch and

a self-locking nut on the threaded rod.

Now fasten the other control arm (2) on the other side

in accordance with the method described

9.3 Mount holder arm (g. 4)

Insert both holder arms (13) into the rectangular steel

tubes, which are located on the left side of the splitter.

Fasten the holder arms (13) with two M10 x 45 mm

hexagon screws and self/locking nuts each.

9.4 Mount holder arm for trunk lifter (g. 5)

Fasten the holder arm (6) with two hexagonal screws

(M10 x 25) on the frame, but do not tension the screws

tightly yet. (more at 9.5)

Remaining hazards

The machine has been built using modern tech-

nology in accordance with recognized safety

rules. Some remaining hazards, however, may

still exist.

• The splitting tool can cause injuries to ngers and

hands if the wood is incorrectly guided or support-

ed.

• Thrown pieces can lead to injury if the work piece

is not correctly placed or held.

• Injury through electric current if incorrect electric

connection leads are used.

• Even when all safety measures are taken, some

remaining hazards which are not yet evident may

still be present.

• Remaining hazards can be minimized by following

the safety instructions as well as the instructions in

the chapter Authorized use and in the entire oper-

ating manual.

• Health hazard due to electrical power, with the use

of improper electrical connection cables.

• Release the handle button and switch o󰀨 the ma-

chine prior to any operations.

• Avoid accidental starts of the machine: Do not

press the start button while inserting the plug into

the socket.

• Use the tools recommended in this manual to ob-

tain the best results from your machine.

• Always keep hands away from the work area when

the machine is running.

7. Technical data

Drive E-motor

Motor 400V / 50Hz

Input P1 4000 W

Output P2 3200 W

Operating mode S6 40%

Motorspeed 1400 min-1

Phase inverter yes

Dimensions D/W/H 1040 x 1000 x 2400 mm

Log length 1060 mm

Power max. 12 t

Piston stroke 860 mm

Forward speed 6 cm/s

Return speed 7 cm/s

Oil quantity 10 l

Weight 188 kg

Subject to technical changes!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HL1300 in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 6.02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HL1300 Manual

Product: