Manual Scheppach HD12 (page 18 of 120) (English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish)

781446

Zoom out

Zoom in

1/120

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

18 / 120

Possible causes are:

• Pinch points when connection cables are run

throught window or door gabs.

• Kinks resulting from incorrect attachment of laying

of the connection cable.

• Cuts resulting from running over the connection ca-

ble.

• Isolation damage resulting from forcefully pulling

out of the wall socket.

Such defective electrical connection cables must

not be used as the isolation damage makes them

extremly hazardous.

Check electrical connection cables regularly for dam-

age. Make sure the cable is disconnected from the

mains when checking.

Electrical connection cables must comply with the

regulations applicable in your country.

One phase motor

• The mains voltage must comply with the specica-

tion on the motor name plate.

• Extension cables must have a cross section of at

least 1.0 sqmm.

• The mains is protected by a 16 A slowblow fuse.

When making inquiries please specify the following:

• Motor manufacturer

• Motor current type

• Motor nameplate specications

• Switch nameplate specications

When sending the motor in, always send the complete

drive unit including the switch.

12. Disposal and recycling

The equipment is supplied in packaging to prevent

it from being damaged in transit. The raw materials

in this packaging can be reused or recycled. Never

place batteries in your household refuse, in re or

in water. Batteries should be collected, recycled or

disposed of by environment-friendly means. The

equipment and its accessories are made of various

types of material, such as metal and plastic. Defec-

tive components must be disposed of as special

waste. Ask your dealer or your local council.

The exhaust system should be cleaned every time the

shavings bag is changed.

Damaged lters and bags must be immediately

changed in order to keep the amount of dust that es-

capes into the work environment as low as possible.

8. Initial operation

Note safety instructions before operation. The data

on the motor type plate (voltage and frequency) must

conform to the mains supply voltage and frequency.

After connection to the mains, the Dust Extractor is

ready for operation.

9. Maintenance

For all maintenance and cleaning tasks, tum off

motor and unplug mains.

• Connection and repair work on the electrical instal-

lation may be carried out by a qualied electrician

only.

• For constant performance, periodi cally shake out l-

ter bag vigorously. Between cleanings, beating the

bag with the hand several times is sufcient.

• The sawdust bag must be replaced a1 the latest

when the sawdust is within 10 cm. of the housing

collar.

Special accessories

Filter bag U/S/G Part no. 3906301013

Filter catridge U/S/G Part no. 7500 6000

10. Storage

Store the device and its accessories in a dark, dry

and frost-proof place that is inaccessible to children.

The optimum storage temperature is between 5 and

30˚C. Store the electrical tool in its original packaging.

11. Electrical connection

Connection and repair work on the electrical equip-

ment must be carried out by a qualied technician

only.

The installed electric motor is factory connected ready

for operation.

The connection made by the customer as well as any

extension cables used must comply with all relevant

regula tions.

Importand note

Defective electrical connection cables

If the power cable is damaged, it must be replaced by

the manufacturer, its customer service or a similarly

qualied person to avoid hazards.

Electrical connection cables often suffer isolation

damage.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HD12 in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4.19 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HD12 Manual

Product: