Manual Scheppach HCP2600 (page 25 of 124) (English, German, French, Italian, Polish)

781401

Zoom out

Zoom in

1/124

GB | 25

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

We hope your new tool brings you much enjoyment

and success.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

Important:

When using electric tools safety precautions should

always be followed to reduce the risk of re, electric

shock and personal injury including the following.

Read all these instructions before attempting to op-

erate this product and save these instructions. Keep

this manual in a safe place, so that the information is

available at all times. If you give the equipment to any

other person, hand over these operating instructions

and safety regulations as well. We cannot accept any

liability for damage or accidents which arise due to a

failure

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture. Read

the instruction manual each time before operating the

machine and carefully follow its information. The ma-

chine can only be operated by persons who were in-

structed concerning the operation of the machine and

who are informed about the associated dangers. The

minimum age requirement must be complied with.

We assume no liability for accidents or damages

resulting by disregarding these instructions and the

safety instructions.

2. Layout (Fig. 1-2)

1. Handle

2. Spray-lance

3. Upper holder spray-lance

3a. Holder spray-nozzles / high pressure hose

4. Nozzle Extension with Quick Connect

5. Cover air lter

6. Wheels

7. Lower support spray-lance

8. Stand

9. Housing Exhaust

10. Spark plug connector

11. Fuel cap

11a. Fuel Tank

12. Spray nozzles

13. Flexible high pressure hose

14. Safety lock spray-lance

15. Trigger spray-lance

16. Run / Stop Switch

17. Connection suction hose for detergent

18. High Pressure Hose Connection

19. Water Inlet (external)

20. Oil cap with oil dipstick

21. Spark plug

22. Reversing starter

23. Chemical Injection Siphon/Filter

24. Air Filter

3. Scope of delivery

Main unit (1x)

Handle (1x)

High pressure hose (1x)

Spray-lance (1x)

Extension spray-lance (1x)

Spray-nozzles (5x)

Wheels (2x)

Stand (1x)

Lower support spray-lance (1x)

Upper holder spray-lance (1x)

Holder spray-nozzles (1x)

Chemical Injection Siphon/Filter (1x)

Bag with small parts (1x)

Manual (1x)

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty

period has expired.

m Attention!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

Heruntergeladen von manualslib.de Handbücher-Suchmachiene

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HCP2600 in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 12.28 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HCP2600 Manual

Product: