782029
19
Zoom out
Zoom in
Previous page
1/100
Next page
www.scheppach.com service@scheppach.com +(49)-08223-4002-99 +(49)-08223-4002-58
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB І 19
7. Before putting the machine into
operation
Correctly using the device
The high-pressure cleaner must be set on a level,
stable surface..
It is recommended that you maintain the correct
operating position every time you use the machine
by placing one hand on the pistol and the other on
the lance.
Never direct the water jet toward electrical lines or
the machine itself.
It is normal for the pump to leak a little; this is nec-
essary to avoid damage to the pump when it is at
a standstill.
Never use the equipment in potentially explosive
areas under any circumstances!
The operating temperature must be between +5
and + 50°C.
Do not cover or modify the lance or the spray noz-
zles in any way.
The high-pressure cleaner is designed to be used
with cold or lukewarm water (max. 50°C); higher
temperatures can damage the pump.
Do not use water that is dirty, gritty or contains any
chemical products, as these could impair operation
and shorten the life of the equipment.
Assembly
Device assembly (g. 1)
Push the handle (1) onto the fastening points at the
top of the device and secure using the two screws
provided (length 25 mm)
Water supply connection (Fig. 2)
Screw the connection for the water supply (14) onto
the device. The connection for the water supply (14)
features a connection for standard hose coupling
systems. Attach the hose coupling of the supply hose
(min. Ø 1/2“/ approx. 13 mm) onto the connection for
the water supply (14) .
Always use an enhanced water hose with an in-
dustry-standard coupling for the water supply. The
length should be at least 6.0 m. (not included in the
scope of delivery)
A backow prevention device must be installed be-
tween the drinking water and the high-pressure
cleaner! Ask your plumbing expert about this.
Suction from open tanks/containers and natural
bodies of water
Use a special self-suction accessory (not included
with delivery / available from dealer)
With this accessory, the high-pressure cleaner can
take in water 0.5 m above the water level. This can
last about 25 to 50 seconds.
Immerse the accessorys hose completely under wa-
ter to drive the air out of the hose.
6. Technical data
Mains voltage 220-240 V~ / 50-60
Hz
Power input 1600 W
Working pressure 9 MPa
Nominal pressure 13,5 MPa
Delivery rate 5,5 l/min
Delivery rate max. 6,8 L/min
Max. water inlet pressure 0,4 MPa
Protection class II
Danger!
Sound and vibration
Sound and vibration values were measured in ac-
cordance with EN 60335.
LpA sound pressure level 79 dB(A)
KpA uncertainty 3 dB(A)
LWA sound power level 97 db(A)
KWA uncertainty 3 dB(A)
Wear ear-mu󰀨s.
The impact of noise can cause damage to hearing.
Total vibration values (vector sum of three directions)
determined in accordance with EN 60335.
Vibration emission value ah ≤ 2,5 m/s2
The specied vibration value was established in ac-
cordance with a standardized testing method. It may
change according to how the electric equipment is
used and may exceed the specied value in excep-
tional circumstances.
The specied vibration value can be used to compare
the equipment with other electric power tools.
The specied vibration value can be used for initial
assessment of a harmful e󰀨ect.
Keep the noise emissions and vibrations to a
minimum.
Only use appliances which are in perfect working
order.
Service and clean the appliance regularly.
Adapt your working style to suit the appliance.
Do not overload the appliance.
Have the appliance serviced whenever necessary.
Switch the appliance o󰀨 when it is not in use.
Wear protective gloves.
19


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HCE1600 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HCE1600 in the language / languages: English, German, French, Italian as an attachment in your email.

The manual is 4.18 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info