Manual Scheppach HC51V (page 69 of 104) (English, German, French, Italian, Polish)

781611

Zoom out

Zoom in

1/104

69GB

2. Layout (Fig. 1,2)

1. Drain plug for condensation water

2. Pressure vessel

3. Wheel

4. Supporting foot

5. Quick-lock coupling (regulated compressed air)

6. Pressure gauge (for reading the preset vessel

pressure)

7. Pressure regulator

8. ON/OFF switch

9. Transport handle

A Hex bolt

B Nut

C Washer

D Flange nut

3. Scope of delivery

• Open the packaging and remove the device

carefully.

• Remove the packaging material as well as the

pack aging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• If possible, store the packaging until the war-

ranty period has expired.

ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

4. Proper use

The compressor is designed to generate com-

pressed air for compressed-air driven tools which

can be driven with an air volume of up to approx.

170 l/min (e.g. tire inator, blow-out pistol and paint

spray gun). Due to the limited air output it is not pos-

sible to use the compressor to drive tools with very

high air consumption (for example orbital sanders,

rod grinders and hammer screwdrivers).

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse. The user / operator and not the manufac-

turer will be liable for any damage or injuries of any

kind caused as a result of this.

Please note that our equipment has not been de-

signed for use in commercial, trade or industri-

al applications. Our warranty will be voided if the

equipment is used in commercial, trade or industrial

businesses or for equivalent purposes.

1. Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment

and success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

WE RECOMMEND:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture.

Read the instruction manual each time before op-

erating the machine and carefully follow its informa-

tion. The machine can only be operated by persons

who were instructed concerning the operation of the

machine and who are informed about the associated

dangers. The minimum age requirement must be

complied with.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HC51V in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 4.55 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach HC51V Manual

Product: