782116
13
Zoom out
Zoom in
Previous page
1/20
Next page
13
Scope of Supply Fig.1
1 Housing complete with motor
2 Undercarriage with wheels
3 Side covering, left
4 Side covering, right
5 Baseplate
6 Cross-member
7 Filter bag
8 Upper clamp
9 Support bar
10 Shavings bag (5x)
11 Lower clamp
12 Exhaust hose
13 Clamp 2x
14 Hose coupling
15 Accessory kit
16 Operating instructions
Assembly
For packaging reasons your machine is delivered in semi-
assembled state.
• Attachtheundercarriageandthebaseplatewithphil-
lips head screws M5 x 6 mm.
• Attachthesidecoveringlooselytothebaseframeusing
atheadscrewsM8x40mmandscrewnuts.Donot
tighten completely.
• Attachthecrossmembertothesidecoveringleftand
rightwithatheadscrewsM8x12andscrewnuts.
• Attachthehousingtothesidecoveringsusingathead
screws M8 x 40 and screw nuts. Securely tighten all
nuts
• Slideinthelterbagoverthecaseandattachitwitha
clamp Position the support bar into the housing and
hang the filter bag from it.
• Attachtheshavingsbagtothelowerairventilatorusing
the clamp.
• Attachtheexhausthosetothenozzleonthehousing
and affix it with a hose clamp.
• Attachthehosecouplingtotheotherendofthehose
using a hose clamp.
The exhaust system should be cleaned every time the
shavings bag is changed.
Damaged filters and bags must be immediately changed
in order to keep the amount of dust that escapes into the
work environment as low as possible.
Initial operation
Note safety instructions before operation. The data on the
motor type plate (voltage and frequency) must conform
to the mains supply voltage and frequency. After connec-
tion to the mains, the Dust Extractor ha 1800 is ready for
operation.
Obsah dodávky obr.1
1 Skriňa s motorom
2 Pojazdný podstavec s kolesami
3 Bočný kryt ľavý
4 Bočný kryt pravý
5 Spodná doska
6 Priečna podpera
7 Filtračný vak
8 Horný spojovací pás
9 Podporná tyč
10 Vak na piliny (5x)
11 Spodná upínacia páska
12 Odsávacia hadica
13 Upínacia páska 2x
14 Hadicová spojka
15 Náhradný vak
16 Návod na použitie
Montáž
Z dôvodov súvisiacich s baliacou technikou nie je váš prí-
stroj kompletne montovaný.
Pojazdný podstavec a spodnú dosku spojte krížovými
skrutkami M5 x 6mm.
Bočný kryt voľne pripevnite na základný podstavec prí-
stroja použitím skrutiek s plochou hlavou M8 x 40 mm
a špeciálnych matíc. Neuťahujte pevne.
Priečnu podperu spojte s ľavým a pravým bočným kry-
tom skrutkami s plochou hlavou M8 x 12 mm a matica-
mi.
Skriňu pripevnite na bočné kryty použitím skrutiek s
plochou hlavou M8 x 40 mm a matíc. Pevne utiahnite
všetky matice.
Filtračný vak vložte do nádrže a upevnite ho upínacou
páskou, do skrine vložte podpornú tyč a zavestete l-
tračný vak.
Vak na piliny upevnite na spodný vývod vzduchu po-
mocou upínacej pásky.
Odsávaciu hadicu upevnite na dýzu na skrini a pripev-
nite ju hadicovou sponou.
Hadicovú spojku upevnite hadicovou sponou na opač-
nom konci hadice.
Odsávacie zariadenie by sa pri každej výmene vaku na
piliny malo vyčistiť. Poškodené ltre a vaky sa musia ih-
neď vymeniť, aby množstvo prachu unikajúceho do pra-
covného prostredia bolo čo najmenšie.
Zagon
Pred zagonom upoštevajte varnostna opozorila. Podatki
na ploščici na motorju (napetost V in frekvenca Hz) se
morajo ujemati s podatki za napetost in frekvenco elek-
tričnega omrežja.
Po priključitvi na električno omrežje je sesalna naprava
ha 1800 pripravljena na uporabo.
13


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach HA 1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach HA 1800 in the language / languages: English, German as an attachment in your email.

The manual is 1.74 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info