Manual Scheppach GS60 (page 24 of 64) (English, German, French, Italian, Spanish)

781393

Zoom out

Zoom in

1/64

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

24 | GB

This may have the following causes

• Passage points, where connection cables are

passed through windows or doors.

• Kinks where the connection cable has been im-

properly fastened or routed.

• Places where the connection cables have been cut

due to being driven over.

• Insulation damage due to being ripped out of the

wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection cables must not

be used and are life-threatening due to the insulation

damage.

Check the electrical connection cables for damage

regularly. Make sure that the connection cable does

not hang on the power network during the inspection.

Electrical connection cables must comply with the

applicable VDE and DIN provisions. Only use con-

nection cables with the marking „H05VV-F“.

The printing of the type designation on the connec-

tion cable is mandatory.

AC motor

• The mains voltage must be 230 V~

• Extension cables up to 25 m long must have a

cross-section of 1.5 mm2.

Connections and repairs of electrical equipment may

only be carried out by an electrician.

• The product meets the requirements of EN 61000-

3-11 and is subject to special connection condi-

tions. This means that use of the product at any

freely selectable connection point is not allowed.

• Given unfavourable conditions in the power sup-

ply the product can cause the voltage to uctuate

temporarily.

• The product is intended solely for use at connec-

tion points that

a) do not exceed a maximum permitted supply im-

pedance “Z”, or

b) have a continuous current-carrying capacity of

the mains of at least 100 A per phase.

• As the user, you are required to ensure, in consul-

tation with your electric power company if neces-

sary, that the connection point at which you wish to

operate the product meets one of the two require-

ments, a) or b), named above.

With a single-phase a.c. motor, we recommend a C

16A or K 16A fuse for machines with a high start-up

current (from 3000 Watt)!

11. Cleaning an maintenance

Leave all work not described in this manual to

an authorised customer service centre. Only use

original parts.

Wear hand protection when working on the blade

cylinder..

Switch the shredder off, unplug it form the mains,

and wait for the blade cylinder to come to a complete

stop before working on it.

General cleaning and servicing

Do not spray water onto the shredder. Electric

shock hazard.

• Always keep the shredder, wheels and air vents

clean. Use a brush or cloth to clean it, avoid clean-

ers and solvents.

• Always check that the shredder and especially the

guards are not worn down or damaged but rmly

attached before use. Check that the nuts, bolts and

screws are tight.

• Check the covers and guards for damage and im-

proper attachment. If necessary, change the com-

ponents

• Keep the shredder in a dry place out of children’s

reach. Do not cover the shredder in nylon bags, as

moisture may develop

WARNING!

Pull out the mains plug for any adjustment or repair

tasks.

Connections and Repairs

Connections and repairs of electrical equipment may

only be carried out by an electrician.

Please provide the following information in the event

of any enquiries:

• Type of current for the motor

• Machine data - type plate

Service information

Please note that the following parts of this product

are subject to normal or natural wear and that the fol-

lowing parts are therefore also required for use as

consumables.

Wear parts*: Carbon brushes, knives, roller

* Not necessarily included in the scope of delivery!

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach GS60 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 4.52 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach GS60 Manual

Product: