Manual Scheppach GP1300 Jet (page 24 of 96) (English, German, French, Swedish, Finnish)

781428

Zoom out

Zoom in

1/96

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

24 | GB

• Insulation damage due to being ripped

out of the wall outlet.

• Cracks due to the insulation ageing.

Such damaged electrical connection ca-

bles must not be used and are life-threat-

ening due to the insulation damage.

Check the electrical connection cables

for damage regularly. Make sure that the

connection cable does not hang on the

power network during the inspection.

Electrical connection cables must comply

with the applicable VDE and DIN provi-

sions. Only use connection cables with

the marking „H05RN-F“.

The printing of the type designation on

the connection cable is mandatory.

For single-phase AC motors, we recom-

mend a fuse rating of 16A (C) or 16A (K)

for machines with a high starting current

(starting from 3000 watts)!

AC motor 230 V~/ 50 Hz

Mains voltage 230 V~ / 50 Hz.

The mains connection and the extension

cable have to be three-core cables = P +

N + SL. - (1/N/PE).

Extension cables up tp 25m long must

have a minimum cross-section of 1.5

mm². Mains fuse protection is 16 A max-

imum.

9. Initial operation

m IMPORTANT!

You must fully assemble the appliance

before using it for the rst time!

• Install the equipment on a solid and lev-

el surface.

• Unscrew the coarse lter screw (6) and

remove the coarse lter (7) as shown

in Figure 2. Now you can ll the pump

housing with water via the coarse lter

screw (6). Filling the intake line acceler-

ates the in take process.

• Assemble in reverse order.

• Open the discharge line.

• Connect the mains cable.

• Switch on the equipment with the pow-

er switch (3) water can be suctioned in

for up to 5 minutes (max mum suction

height).

• After nishing the work, switch o󰀨 the

equipment with the power switch (3)

Electrical connection

The electrical motor installed is connect-

ed and ready for operation. The connec-

tion complies with the applicable VDE

and DIN provisions.

Damaged electrical connection cable

The insulation on electrical connection

cables is often damaged.

This may have the following causes:

• Passage points, where connection ca-

bles are passed through windows or

doors.

• Kinks where the connection cable has

been improperly fastened or routed.

• Places where the connection cables

have been cut due to being driven over.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach GP1300 Jet in the language / languages: English, German, French, Swedish, Finnish as an attachment in your email.

The manual is 2.64 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach GP1300 Jet Manual

Product: