781426

Scheppach GP1000 Jet LCD Manual

26
Zoom out
Zoom in
Previous page
1/88
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26 | GB
4. Now set the current time.
Note: 00:00 (hh/mm) – 24h time mode.
You can set the current time by press-
ing the “Set button” (5) for “+” and the
“Mode button” (4) for “-”. Pressing the
“Check button” (6) changes from the
hours setting to the minutes setting.
5. Pressing the “Check button” (6) again
for “Next” changes to “Time On” Tim-
er mode (Fig. 11).
6. To set the time when the pump is to
switch on “Time On”, repeat points 3
- 4. To conrm the setting, press the
“Check button” (6) to continue.
7. To set the time when the pump is to
switch o󰀨 “Time O󰀨”, repeat points 3 -
4. Press the “Check button” (6) to con-
rm the setting and continue.
8. The switch-on and switch-o󰀨 times
then appear in the display “Time On /
Time O󰀨” (Fig. 13). It is not necessary
to press the “Check button” (6) again.
9. After a brief waiting time, “Time Mode”
(Fig. 14) appears in the display show-
ing the time set.
Electrical connection
The electrical motor installed is connect-
ed and ready for operation. The connec-
tion complies with the applicable VDE
and DIN provisions.
Damaged electrical connection cable
The insulation on electrical connection
cables is often damaged.
This may have the following causes:
• Passage points, where connection ca-
bles are passed through windows or
doors.
• Kinks where the connection cable has
been improperly fastened or routed.
Explanation of the display functions
(Fig. 3 - 8)
Power On
Pump is connected to an electrical pow-
er source
Automatic Mode
Pump is running automatically
Time Mode
To set the time
Time Now
To set the current time
Time Mode NOT SET
Current time has not been set
Ever - On Mode (Not Recommend)
Pump runs continuously, not recommend-
ed
9. Initial operation
m IMPORTANT!
You must fully assemble the appliance
before using it for the rst time!
Setting the time and the “Time Mode”
timer (Fig. 5, 9 - 14)
1. Connect the pump to the power sup-
ply.
2. Press the “Mode button” (4) several
times until “Time mode” is displayed
(Fig. 5). After a brief waiting time,
“Time Now” appears in the display
(Fig. 9).
3. Press the “Set button” (5) to activate
the time setting function (Fig. 10).
… 26 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach GP1000 Jet LCD at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach GP1000 Jet LCD in the language / languages: English, German, French, Finnish as an attachment in your email.

The manual is 3.69 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info