782050
24
Zoom out
Zoom in
Previous page
1/188
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
24 | GB
3. Installing den collection box (Fig. G)
Place the locking mechanism (13) on the collection
box (8) in its lowest position (Fig. G).
Push the collection box fully into the frame.
Press the locking mechanism (9) on the collection
box (8) back into its highest position (Fig. I).
9. Operation
       
the collection box (8) has been pushed into the

position.
Control panel (Fig. B)
   Pressing this button starts the
shredder.
󰀨   Pressing this button stops the
shredder.

       
pressed, the blade cylinder rotates anti-clockwise.
This is necessary when jammed shredding materi-
al needs to be freed. This function is only available
when the shredder is in operation.
       
direction of the blade cylinder from anti-clockwise
back to clockwise.
Overload protection

     -
       
       -

Make sure the collection box (8) is pushed into the
frame correctly and the locking device (9) is in the
upper position.
Connect the shredder to the power supply.
Turn the shredder on by using the on switch (3).
Fill shredding material into the feed hopper and it
will be drawn in.
Caution      
󰀨
the switch for roll rotation direction (11) downwards
to the “ = “ sign. Start the device by pressing the
green on switch (2). Stop the device by pressing
󰀨
Push the switch (11) to the “ - “ sign. The device is
ready for operation.
-

Do not use your hands to push in more shredding
material. Use the special pushing device (c) or oth-
er shredding material.

󰀨

󰀨
Set the locking device (9) to the lowest position.
Pull out the collection box (8) and empty it.
Re-insert the collection box (8) and push the lock-
ing device (9) up again.
Setting the counter blade
The counter blade and the blade cylinder have
     


-

Turn the shredder on.
Turn the adjustment wheel (5) clockwise until you
can hear slight grinding sounds.
When turning the adjustment wheel (5) clockwise
by half a turn, the blade cylinder is positioned clos-
er to the counter blade by 0.50 mm.
      



 

Overload protection
In the event of overload, e.g. due to branches that are
󰀨
After a short cooling period (approximately 5 min-
utes), press the reset switch (12).
10. Electrical connection
      
     

-

regulations.

The insulation on electrical connection cables is of-
ten damaged.
24


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach GLH-S-28FB at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach GLH-S-28FB in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Turkish, Spanish, Norwegian as an attachment in your email.

The manual is 9.34 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info