Manual Scheppach Forsa 8.0 (page 27 of 60) (English, German, Finnish)

782260

Zoom out

Zoom in

1/60

english 22

Assembly

Always disconnect the power supply plug before doing any

assembly or conversion work.

For packing reasons your panel sizing circular saw is only

partly assembled at delivery.

Assembly Tools

Scope of delivery includes:

1 single-head wrench 19 mm span

1 single-head wrench 30 mm span

1 hexagonal

head wrench 5 mm span

1 hexagonal

head wrench 6 mm span

Longitudinal stop, Fig. A

Screw the guide shaft on both shaft supports, do not tigh-

ten them yet.

2 discs 8

2 cylinder screws M 8 x 16

Fig. B

Pull both clamp levers upwards and locate the skid on the

shaft.

Longitudinal stop - adjustment, Fig. C

Locate a straight, approx. 600 to 800 mm long guide rail

to the saw blade to adjust the longitudinal stop precise-

ly. Align the stop by measuring and adjusting the stop

several times (X).

Tighten both cylinder screws now.

Adjust microﬁlm reading glass D

Position the stop rail against the saw blade and clamp the

eccentric lever. Loosen the attachment bolts of the

microﬁlm reading glass and set the graduation mark exactly

above the zero line of the scale, subsequently fasten both

screws again

Important!

Use a measuring rod with cutting widths under 120 mm.

Fig. A

Fig. B

Fig. C

Fig. D

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Forsa 8.0 in the language / languages: English, German, Finnish as an attachment in your email.

The manual is 9.46 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach Forsa 8.0 Manual

Product: