Manual Scheppach EB2000 SE (page 18 of 52) (English, German, French)

781990

Zoom out

Zoom in

1/52

www.scheppach.com

18 | GB

2. Device description (g. 1 + 2)

1. Engine

2. Fuel tank

3. Air lter / carburettor cover

4. Transmission

5. Idle setting

6. Drive shaft

7. Drill: 7a; Ø100 / 7b; Ø150 / 7c; Ø200mm

8. Spark plug cap

9. Choke

10. Handle

11. Stop switch

12. Transmission lubricating nipple

13. Gas regulating lever

14. Locking lever

15. Tank cover

16. Fuel pump

3. Scope of delivery

• Motor casing with handle

• Drill Ø 100, 150, 200 mm

• Petrol mixing container (D)

• Locking pin 3x (A)

• Spark plug spanner (B)

• Operating instructions

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty

period has expired.

m ATTENTION!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and su󰀨ocation!

4. Intended use

The machine complies with the relevant EC Machine

Guideline.

• Before starting any work, all protective and safety

devices must be in place on the earth auger.

• The earth auger has been designed to be operated

by one person.

• The earth auger has been designed for excavating

planting holes, for pergolas and fences in light soil.

It has only limited use on ground that is hard and

stony and has many roots.

1. Introduction

Manufacturer:

Scheppach GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

We hope you have a lot of fun and success using your

new machine.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device. The operating instructions are intended to

help the user to become familiar with the machine

and take advantage of its application possibilities in

accordance with the recommendations. The operat-

ing instructions contain important information on how

to operate the machine safely, professionally and

economically, how to avoid danger, costly repairs, re-

duce downtimes and how to increase reliability and

service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regu-

lations that apply for the operation of the machine in

your country. Keep the operating instructions pack-

age with the machine at all times and store it in a

plastic cover to protect it from dirt and moisture. Read

the instruction manual each time before operating the

machine and carefully follow its information. The ma-

chine can only be operated by persons who were in-

structed concerning the operation of the machine and

who are informed about the associated dangers. The

minimum age requirement must be complied with.

In addition to the safety notices contained in this

operating manual and the particular instructions for

your country, the generally recognised technical reg-

ulations for the operation of identical devices must be

complied with.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach EB2000 SE in the language / languages: English, German, French as an attachment in your email.

The manual is 3.61 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach EB2000 SE Manual

Product: