Manual Scheppach DTB250-20ProS (page 20 of 108) (English, German, French, Polish)

782592

Zoom out

Zoom in

1/108

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

20 | GB

• Do not use non-rechargeable batteries. This

could damage the appliance.

Warning! This electric tool generates an electromag-

netic eld during operation. This eld can impair ac-

tive or passive medical implants under certain condi-

tions. In order to prevent the risk of serious or deadly

injuries, we recommend that persons with medical

implants consult with their physician and the manu-

facturer of the medical implant prior to operating the

electric tool.

7. Residual risks

The machine has been built according to the state of

the art and the recognised technical safety require-

ments. However, individual residual risks can arise

during operation.

• Health hazard due to electrical power, with the use

of improper electrical connection cables.

• Furthermore, despite all precautions having been

met, some non-obvious residual risks may still re-

main.

• Residual risks can be minimised if the „safety in-

structions“ and the „Proper use“ are observed

along with the whole of the operating instructions.

• Avoid accidental starting of the machine: the oper-

ating button may not be pressed when inserting the

plug in an outlet. Use the tool that is recommend-

ed in this manual.. This ensures that your machine

performs optimally.

• Hands may never enter the processing zone when

the machine is in operation.

8. Technical data

Cordless drill:

Nominal voltage: 20 V

Idle-running speed:

1st gear: max. 0 - 450 min-1

Idle-running speed:

2nd gear: max. 0 - 1600 min-1

Punching power: 0 - 25600 bpm

Max. torque: 45 Nm

Drill chuck

clamping range: max. 13 mm

Weight: 1,3 kg

Subject to technical changes!

Noise and vibration

m Warning: Noise at the workplace can exceed 85

dB (A). In this case, noise protection measures are

necessary for the user (wear hearing protection!).

Before you carry out any tasks on the device, trans-

port or store it, make sure that the direction of rotation

switch is in the middle position (lock). To prevent the

device from starting up unintentionally.

Attention - Service lines!

Danger! Take steps to ensure that you do not hit

upon any service lines (electricity, gas, water) when

working with electrical appliances. Check, if need be

with a service line detector, before you start to cut or

bore into a surface.

Information on the rechargeable battery

• Please observe the operating manual for the re-

chargeable batteries.

Information on the charging unit and charging

process

• Please observe the operating manual for the

charging unit.

Careful handling and use of battery devices

• Charge the batteries only in chargers that are

recommended by the manufacturer. Risk of re

if a charger that is suitable for a specic type of

battery is used with other batteries.

• In the power tools, use only the batteries de-

signed for the purpose. The use of other batter-

ies may result in injuries and risk of re.

• Keep the unused battery away from paper

clips, coins, keys, nails, screws and other small

metal objects, which could cause bridging of

the contacts. A short circuit between the battery

contacts may cause burns or re.

• If used incorrectly, liquid may leak from the bat-

tery. Avoid contact with this. In the event of acci-

dental contact, rinse off with water. If the liquid

gets into eyes, seek medical assistance. Leaking

battery uid may cause skin irritations or burns.

• Ensure that the device is switched off before in-

serting the battery. Inserting a battery into a power

tool that is switched on may result in accidents.

• Recharge the batteries indoors only because

the battery charger is designed for indoor use

only. Risk of electric shock.

• To reduce the electric shock hazard, unplug the

battery charger from the mains before cleaning

the charger.

• Do not subject the battery to strong sunlight over

long periods and do not leave it on a heater. Heat

damages the battery and there is a risk of explosion.

• Allow a hot battery to cool before charging.

• Do not open up the battery and avoid mechan-

ical damage to the battery. Risk of short circuit

and fumes may be emitted that irritate the respira-

tory tract. Ensure fresh air and seek medical assis-

tance in the event of discomfort.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DTB250-20ProS in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 4.67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DTB250-20ProS Manual

Product: