Manual Scheppach DTB250-20ProS (page 17 of 108) (English, German, French, Polish)

782592

Zoom out

Zoom in

1/108

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

GB | 17

We accept no liability for accidents or damage that

occur due to a failure to observe this manual and the

safety instructions.

2. Device description (Fig. 1)

1. Gear selector switch

2. Direction of rotation switch / lock

3. ON / OFF Switch / R.P.M. regulator

4. Belt clip

5. Rechargeable battery pack

6. Battery pack release button

7. LED-light

8. Torque pre-selector

9. Drill chuck

10. Rotary switch for screwing / drilling / hammer-drill-

ing

3. Scope of delivery

- Cordless impact drill

- Translation of original instruction manual

- Accessory Set

- 2AH battery (2 pieces)

- Charger

4. Intended use

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of

misuse. The user / operator and not the manufacturer

will be liable for any damage or injuries of any kind

caused as a result of this.

To use the equipment properly you must also observe

the safety information, the assembly instructions and

the operating instructions to be found in this manual.

All persons who use and service the equipment have

to be acquainted with this manual and must be in-

formed about the equipment’s potential hazards.

It is also imperative to observe the accident preven-

tion regulations in force in your area.

The same applies for the general rules of health and

safety at work.

The manufacturer will not be liable for any changes

made to the equipment nor for any damage resulting

from such changes.

The machine may be used only with original accesso-

ries and original tools of the manufacturer.

The safety-, workplace- and maintenance specica-

tions of the manufacturer as well as the dimensions

specied in the technical data must be observed.

Please note that our equipment has not been de-

signed for use in commercial, trade or industrial appli-

cations. Our warranty will be voided if the equipment

is used in commercial, trade or industrial businesses

or for equivalent purposes.

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

we wish you a pleasant and successful working expe-

rience with your new scheppach machine.

Note:

According to the applicable product liability law the

manufacturer of this device is not liable for damages

which arise on or in connection with this device in

case of:

• improper handling,

• non-compliance with the instructions for use,

• repairs by third party, non authorized skilled work-

ers,

• installation and replacement of non-original spare

parts,

• improper use,

• failures of the electrical system due to the non-com-

pliance with the electrical specications and the

VDE 0100, DIN 57113 / VDE 0113 regulations

Recommendations:

Read the entire text of the operating instructions prior

to the assembly and operation of the device.

These operating instructions are intended to make it

easier for you to get familiar with your device and uti-

lize its intended possibilities of use.

The operating instructions contain important notes on

how to work safely, properly and economically with

your machine and how to avoid dangers, save repair

costs, reduce downtime, and increase the reliability

and working life of the machine.

In addition to the safety regulations contained herein,

you must in any case comply with the applicable reg-

ulations of your country with respect to the operation

of the machine.

Put the operating instructions in a clear plastic folder

to protect them from dirt and humidity, and store them

near the machine. The instructions must be read and

carefully observed by each operator prior to starting

the work.

Only persons who have been trained in the use of the

machine and have been informed on the related dan-

gers and risks are allowed to use the machine. The

required minimum age must be met.

In addition to the safety notes contained in the pres-

ent operating instructions and the special regulations

of your country, the generally recognized technical

rules for the operation of wood working machines

must be observed.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DTB250-20ProS in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 4.67 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DTB250-20ProS Manual

Product: