Manual Scheppach DS200 (page 14 of 44) (English, German, Dutch, French)

781637

Zoom out

Zoom in

1/44

General information

• After unpacking, check all parts for possible transportation dama-

ges. In the event of complaints, inform the supplier immediately. Any

complaints made after this time will not be accepted.

• The shipment is to be checked for completeness upon receipt.

• Read through the manual carefully in order to make yourself familiar

in dealing with the device before using it for the rst time.

• Only use original equipment regarding accessories, as well as

consumable items and spare parts. Spare parts can be obtained

from your specialized dealer. When ordering, please specify our part

numbers, as well as type and construction year of the device.

NOTE:

According to the applicable product liability laws, the manufacturer of the

device does not assume liability for damages to the product or damages

caused by the product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service technicians,

• Installation and replacement of non-original spare parts,

• Application other than specied,

• A breakdown of the electrical system that occurs due to the non-

compliance of the electric regulations and VDE regulations 0100, DIN

57113 / VDE0113.

We recommend:

Read through the complete text in the operating instructions before

installing and commissioning the device. The operating instructions are

intended to help the user to become familiar with the machine and take

advantage of its application possibilities in accordance with the recom-

mendations. The operating instructions contain important information

on how to operate the machine safely, professionally and economically,

how to avoid danger, costly repairs, reduce downtimes and how to incre-

ase reliability and service life of the machine.

In addition to the safety regulations in the operating instructions, you

have to meet the applicable regulations that apply for the operation of

the machine in your country. Keep the operating instructions package

with the machine at all times and store it in a plastic cover to protect it

from dirt and moisture. Read the instruction manual each time before

operating the machine and carefully follow its information. The machine

can only be operated by persons who were instructed concerning the

operation of the machine and who are informed about the associated

dangers. The minimum age requirement must be complied with.

We have marked the points in this manual that concern your safe-

ty with this sign: m

Safety notices m

WARNING: When using electric tools basic safety precautions should

always be followed to reduce the risk of re, electric shock and perso-

nal injury.

WARNING: Read all safety warnings and instructions. Failure to follow

the warnings and instructions may result in electric shock, re and/ or

serious injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated

(corded) power tool

or battery-operated (cordless) power tool.

Work area safety

• Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

• Do not operate power tools in explosive atmospheres, such as in the

presence of ammable liquids, gasses or dust. Power tools create

sparks which may ignite the dust or fumes.

• Keep children and bystanders away while operating power tool.

Distractions can cause you to lose control.

Electrical Safety

• Power tool plugs must match the outlet. Never modify the plug in any

way Do not use any adapter plugs with earthed (grounded) power

tools. Unmodied plugs and matching outlets will reduce the risk of

electric shock.

• Avoid body contact with earthed or grounded surfaces, such as

pipes, radiators, ranges and refrigerators. There is an increased risk

of electric shock if your body is earthed or grounded.

• Do not expose power tools to rain or wet conditions. Water entering a

power tool will increase the risk of electric shock.

• Do not abuse the cord. Never use the cord for carrying, pulling or un-

plugging the power tool.Keep cord away from heat, oil, sharp edges

or moving parts. Damaged or entangled cords increase the risk of

electric shock.

• When operating a power tool outdoors, use an extension cord suitab-

le for outdoor use. Use of a cord suitable for outdoor use reduces the

risk of electric shock.

• If operating a power tool in a damp location is unavoidable, use a

residual current device (RCD) protected supply. Use of an RCD redu-

ces the risk of electric shock.

Personal Safety

• Stay alert, watch what you are doing and use common sense when

operating a power tool. Do not use a power tool while you are tired

or under the inuence of drugs, alcohol or medication. A moment of

inattention while operating power tools may result in serious personal

injury.

• Use personal protective equipment. Always wear eye protection. Pro-

tective equipment such as dust masks, non-skid safety shoes, hard

hat or hearing protection used for appropriate conditions will reduce

personal injuries.

• Prevent unintentional starting. Ensure the switch is in the off-position

before connecting to power source and or battery pack, picking up

or carrying the tool. Carrying power tools with your nger on the

switch or energising the power tools that have the switch on invites

accidents.

• Remove any adjusting key or wrench before turning the power tool

on. A wrench or key left attached to a rotating part of a power tool

may result in personal injury .

• Do not overreach. Keep proper footing and balance at all times. This

enables better control of the power tool in unexpected situations.

• Dress properly. Do not wear loose clothing or jewellery. Keep your

hair, clothing and gloves away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

• If devices are provided for the connection of dust extraction and coll-

ection facilities, ensure that these are connected and properly used.

Use of dust collection can reduce dust-related hazards.

Power tool use and care

• Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at

a rate for which it was designed.

• Do not use the power tool if the switch does not turn it on or off. Any

power tool that cannot be controlled with the switch is dangerous and

must be repaired.

• Disconnect the power tool from the power source and/or battery pack

from the power tool before making any adjustments, changing ac-

cessories, or storing power tools. Such preventative safety measures

reduce the risk of starting the power tool accidentally.

• Store idle power tools out of the reach of children and do not allow

persons unfamiliar with the power tool or these Instructions to

operate the power tool. Power tools are dangerous in the hands of

untrained users.

• Maintain power tools. Check for misalignment or binding of moving

parts, breakage of moving parts and any other condition that may

affect the power tools operation. If damaged, have the power tool

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DS200 in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 3.36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DS200 Manual

Product: