Manual Scheppach DP19Vario (page 26 of 148) (English, German, French, Italian, Polish)

781654

Zoom out

Zoom in

1/148

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

26 | GB

The specied vibration value can be used for initial

assessment of a harmful effect.

7. Before commissioning

• Open the packaging and carefully remove the de-

vice.

• Remove the packaging material as well as the

packaging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for trans-

port damage.

• If possible, store the packaging until the warranty

period has expired.

ATTENTION

The device and the packaging are not children‘s

toys! Do not let children play with plastic bags,

lms or small parts! There is a danger of choking

or suffocating!

8. Installation

Column and machine foot, g. 3

1. Set the machine foot (1) down on the ground or

the workbench.

2. Place the column (2) on the base plate so that the

holes on the column (2) align with the holes on the

base plate (1).

3. Screw the four hexagonal screws (17) to fasten

the column into the base plate and tighten them

using a hexagon spanner.

Removing the rack, Fig.4

In order to install your drill, you must rst remove the

rack (D)

1. Use an Allen key (SW3) to remove the ring (E)

and pull this off the column (2).

2. Now pull the rack (D) out.

Installing the drilling table holder, Fig. 5-/

1. Insert the rack (D) into the groove on the drilling

table holder (4).

2. Align the rack (D) centrally in relation to the drill-

ing table holder (4).

3. When bringing the rack (D) together within the

groove, ensure that the tooth meshing between

the rack and the drilling table holder (4) is cor-

rect.

4. Now place the drilling table holder (4) with the

rack (D) on the column (2) and guide the rack (D)

into the bottom rack guide on the column foot.

5. Use the ring (E) to secure the rack (D). Ensure

that the rack guide on the ring (E) is pointing

downwards. Tighten the integrated Allen screw

to afx the ring (E).

6. Technical Data

Nominal input voltage 230-240V~ 50

Power rating 550 W

Motor speed 1450 min-1

Output speed (innitely

adjustable) 440 - 2580 min-1

Drill chuck mount B16

Chuck 1 - 16 mm

Dimensions of drill table 198 x194 mm

Angle adjustment 45° - 0° - 45°

Drilling depth 60 mm

Pillar diameter 60 mm

Height 830 mm

Weight 27,5 kg

Laser class 2

Wavelength of laser 650mm

Laser output 1mW

Noise and vibration values

The noise levels have been determined in accord-

ance with EN 61029.

sound pressure level - no load LpA

70.2

dB(A)

sound pressure level - load LpA

73.5

dB(A)

uncertainty KpA 3 dB(A)

sound power level - no load LWA

82.7

dB(A)

sound power level - load LWA

86.3

dB(A)

uncertainty KWA 3 dB(A)

Wear hearing protection.

Excessive noise can result in a loss of hearing. Total

vibration values (vector sum of three directions) de-

termined according to EN 61029.

Vibration emission value ah = 1.7 m/s2

K uncertainty = 1,5 m/s2

The specied vibration value was established in ac-

cordance with a standardized testing method. It may

change according to how the electric equipment is

used and may exceed the specied value in excep-

tional circumstances.

The specied vibration value can be used to compare

the equipment with other electric power tools.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DP19Vario in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 7.17 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DP19Vario Manual

Product: