Manual Scheppach DM600VARIO (page 18 of 124) (English, German, French, Italian, Polish)

781460

Zoom out

Zoom in

1/124

 www.scheppach.com /  service@scheppach.com /  +(49)-08223-4002-99 /  +(49)-08223-4002-58

18 | GB

In addition to the safety notes contained in the pres-

ent operating instructions and the special regulations

of your country, the generally recognized technical

rules for the operation of woodworking machines

must be observed.

We accept no liability for damage or accidents which

arise due to non-observance of these instructions

and the safety information.

2. Device description

1. Motor unit

2. On/Off switch

3. Speed control

4. Headstock drive centre

5. Tool support

6. Tool rest

7. Centering pin

8. Counternut

9. Tailstock

10. Handwheel

11. Clamping lever tailstock

12. Machine bed

13. Locking screw

14. Clamping lever tool rest

15. Face plate

3. Scope of delivery

• 1 Motor unit

• 1 Headstock drive centre

• 1 Tool rest

• 1 Tool support

• 1 Centering pin

• 1 Tailstock

• 1 Machine bed

• 1 Face plate

• 2 Wrench SW24

• 1 Clamping lever tool rest (pre-assembled)

• 8 Fastening screws (B)

• 1 Instruction manual

4. Intended use

The machine is only designed for working on wood

using a suitable turning tool.

The machine meets the currently valid EU machine

directive.

The manufacturer’s safety, operation and mainte-

nance instructions as well as the technical data given

in the calibrations and dimensions must be adhered

to.

Relevant accident prevention regulations and other

generally recognized safety and technical rules must

also be adhered to.

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear Customer,

we hope your new tool brings you much enjoyment

and success.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• Improper handling

• Non-compliance of the operating instructions

• Repairs by third parties, not by authorized service

technicians

• Installation and replacement of non-original spare

parts

• Application other than specied

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

Read through the complete text in the operating in-

structions before installing and commissioning the

device.

The operating instructions are intended to help the

user to become familiar with the machine and take

advantage of its application possibilities in accord-

ance with the recommendations.

The operating instructions contain important informa-

tion on how to operate the machine safely, profes-

sionally and economically, how to avoid danger, cost-

ly repairs, reduce downtimes and how to increase

reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regu-

lations that apply for the operation of the machine in

your country.

Keep the operating instructions package with the

machine at all times and store it in a plastic cover

to protect it from dirt and moisture. Read the instruc-

tion manual each time before operating the machine

and carefully follow its information. The machine can

only be operated by persons who were instructed

concerning the operation of the machine and who are

informed about the associated dangers.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DM600VARIO in the language / languages: English, German, French, Italian, Polish as an attachment in your email.

The manual is 7.36 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DM600VARIO Manual

Product: