782068
26
Zoom out
Zoom in
Previous page
1/148
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26 |
11. Working instructions

detail in technical literature.

knotholes, cracks or similar. You could lose con-

Cracked workpieces can rupture during turning.


possible before machining.
Observe the maximum workpiece length and the
maximum workpiece diameter! 
in the technical data.
-
󰀨
machine.



check the following 
- 
- Does the workpiece come into contact with the

        


reached the set rotational speed.
Remove blockages
Switch the device o󰀨 and pull out the mains plug.
Clean the device of dust and chippings to remove the
blockage.
12. Electrical connection

for operation. The connection complies with the ap-
     The customer‘s
mains connection as well as the extension cable

Damaged electrical connection cable
The insulation on electrical connection cables is of-
ten damaged.

Pressure points, where connection cables are
passed through windows or doors.
Kinks where the connection cable has been im-

Places where the connection cables have been cut
due to being driven over.

wall outlet.
Cracks due to the insulation ageing.
Securing with the face plate (13) (Fig. 2)
1. 
open-ended spanner (16).
2. 
(18).
3. 

m ATTENTION!
Danger of injury! Position the wood screws
such that they will not be accidentally ex-
posed by the tool when machining the work-
piece.
4.  
open-ended spanner (16).
5. Screw the face plate (13) with the pre-mounted
workpiece onto the drive shaft (18).
Adjusting the tool support (Fig. 1)
m ATTENTION!
Danger of injury! Make sure that the tool support
is well xed and cannot come loose during op-
eration.
Fixing/releasing the tool support
1. 
(9) downwards.
2.         
lever (9) upwards. You can now move the tool
support.
Note:
If it is di󰀩cult to move the tool support (2) or the
tailstock (5), adjust the nut on the underside with
a spanner or ratchet (19 mm).
Height adjustment of the tool support
3. Loosen the screw (2a) on the lower part of the tool
support (2b).
4. Set the desired height.
5.         
(2a).
Switching on/o󰀨 (g. 1)
1. Connect the device to the mains voltage.
2. 
the device on.
3. 󰀨󰀨 the
󰀨
m ATTENTION!
If you leave the device unattended or have n-
ished working, pull out the mains plug.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach DM500T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DM500T in the language / languages: English, German, Dutch, Danish, French, Italian, Polish, Swedish, Spanish as an attachment in your email.

The manual is 4.67 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info