782073
10
Zoom out
Zoom in
Previous page
1/108
Next page
10 english
Manufacturer
Scheppach
Fabrikation von Holzbearbeitungsmaschinen GmbH
Günzburger Straße 69
D-89335 Ichenhausen
Dear customer,
We wish you much pleasure and success with your
new scheppach machine.
Note
In accordance with valid product liability laws, the
manufacturer of this device shall not be responsible
for damage to and from this device which results from:
Improper care.
Noncompliance with the Operating Instructions.
Repairs made by unauthorized persons.
The installation and use of any parts which are not
original scheppach replacement parts.
Improper use and application.
Failure the electrical system as a result of noncom-
pliance with the legal and applicable electrical direc-
tives and VDE regulations 0100, DIN 57113 / VDE
0113.
We recommend
that you read through the entire operating instructions
before putting into operation.
These operating instructions are to assist you in get-
ting to know your machine and utilize its proper ap-
plications.
The operating instructions contain important notes on
how you work with the machine safely, expertly, and
economically, and how you can avoid hazards, save
repair costs, reduce downtime and increase the reli-
ability and service life of the machine.
In addition to the safety requirements contained in
these operating instructions, you must be careful to
observe your country’s applicable regulations.
The operating instructions must always be near the
machine. Put them in a plastic folder to protect them
from dirt and humidity. They must be read by every
operator before beginning work and observed consci-
entiously. Only persons who have been trained in the
use of the machine and have been informed of the
various dangers may work with the machine. The re-
quired minimum age must be observed.
In addition to the safety requirements contained in
these operating instructions and your country’s appli-
cable regulations, you should observe the generally
recognized technical rules concerning the operation
of woodworking machines.
m General notes
After unpacking, check all parts for any transport
damage. Inform the supplier immediately of any
faults.
Later complaints cannot be considered.
Make sure the delivery is complete.
Before putting into operation, familiarize yourself
with the machine by carefully reading these instruc-
tions.
Use only original scheppach accessories, wearing
or replacement parts. You can nd replacement
parts at your scheppach dealer.
When ordering, include our item number and the
type and year of construction of the machine.
DM460T
Included with delivery
Wood turning machine
Work piece table
Carrier
Rotating tailstock centre
Independent chuck
Mandrel
Tappet
Jaw spanner SW 32/41
Hex driver 3/6/8
Operating instructions
Technical data
Dimensions
L x B x H mm 940 x 270 x 420
Bed height mm 190
Headstock
thread M 33
Headstock ta-
per MK 2
Height of cent-
ers above bed
mm 152
Width between
centers mm 457
Diameter
above bed mm 305
Diameter be-
tween centers
mm 240
Length of tool
holder mm 150
Weight kg 34,8
Wood turning spindle with dust-proof precision grooved ball
bearing
Revolutions
1/min 650 / 1000 / 1450 / 2000 / 3000
Tailstock
Tailstock cone MK 2
Tailstock drill
hole (hollow
spindle) ø mm 9,5
Tailstock
sleeve adjust-
ment mm 47
Drive
Electric Motor 220 – 240V~ / 50 Hz
Input P1 kW 0,55
Output P2 kW 0,30
Revolutions
1/min 1400
Motor protec-
tion yes
Undervoltage
release yes
Operating
mode S1
Noise parameters
Acoustic power level in dB
Idling LWA = 74.3 dB(A),
Operating LWA = 91.7 dB(A)
Acoustic pressure level in dB
Idling LpAeq = 61.3 dB(A),
Operating LpAeq = 78.7 dB(A)
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach DM460T at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DM460T in the language / languages: English, German, Dutch, Danish, French, Italian, Swedish, Norwegian, Finnish as an attachment in your email.

The manual is 4.39 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info