Manual Scheppach DH6000 (page 16 of 76) (English, German, Dutch, French, Italian, Finnish)

781632

Zoom out

Zoom in

1/76

16 І 7616 І 7616 І 76

2. Device description (Fig. 1-5)

1. DH6000

2. Air inlet

3. Cover ap

4. Support frame

5. Wheels

6. Handle

7. Display

8. Air outlet

9. Wheel acle

10. Water tank

A. De-humidifying operation

B. Level idicator

C. Automatic defrosting

D. Speed display

E. Operating hours counter

F. Humidity display

G. On/Off switch

H. Increase target

I. Decrease target humidity

J. Set speed

3. Scope of delivery

1x - DH6000

1x - Handle

2x - Wheels

1x - Manual

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the

packaging and transport bracing (if available)

• Check that the delivery is complete.

• Check the device and its spare parts for possible

damage caused by transportation. In the event of

complaints, you must contact the distributor with-

out delay. Claims at a later stage will not be ac-

cepted.

• If possible, store the packaging until the warranty

period has expired

m Attention!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

4. Intended use

The device is designed for applications operated with

a 230 V alternating current source.

Be sure to observe the restrictions in the safety in-

structions.

This air dehumidier is only designed for indoor use to

dry moist walls damage caused by water or to reduce

the air humidity in conned spaces.

The intended usage also includes compliance with the

operating, servicing and repair conditions prescribed by

the manufacturer and following the safety instructions

included in the instructions.

1. Introduction

Manufacturer:

scheppach

Fabrikation von Holzbearbeitungsmaschinen GmbH

Günzburger Straße 69

D-89335 Ichenhausen

Dear customer,

We hope you have a lot of fun and success using your

new machine.

Note:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by

the product that occurs due to:

• improper handling,

• noncompliance of the operating instructions,

• repairs by third parties, not by authorized service

technicians,

• installation and replacement of non-original spare

parts,

• non-intended use,

• A breakdown of the electrical system that occurs

due to the non-compliance of the electric regu-

lations and VDE regulations 0100, DIN 57113 /

VDE0113.

We recommend:

that you read through the entire operating instruc-

tions before putting the machine into operation.

These operating instructions are to assist you in get-

ting to know your machine and utilize its proper ap-

plications. The operating instructions contain impor-

tant notes on how you work with the machine safely,

expertly, and economically, and how you can avoid

hazards, save repair costs, reduce downtime and in-

crease the reliability and service life of the machine.

In addition to the safety requirements contained in

these operating instructions, you must be careful to

observe your country’s applicable regulations.

The operating instructions must always be near the

machine. Put them in a plastic folder to protect them

from dirt and humidity. They must be read by every

operator before beginning work and observed con-

scientiously. Only persons who have been trained in

the use of the machine and have been informed of

the various dangers may work with the machine. The

required minimum age must be observed. In addition

to the safety requirements in these operating instruc-

tions and your country’s applicable regulations, you

should observe the generally recognized technical

rules concerning the operation of identically con-

structed devices.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DH6000 in the language / languages: English, German, Dutch, French, Italian, Finnish as an attachment in your email.

The manual is 5.4 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DH6000 Manual

Product: