Manual Scheppach DH1000PLUS (page 11 of 44) (English, German, French, Polish)

781874

Zoom out

Zoom in

1/44

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

11 І 44

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

GB Caution - Read the operating instructions to reduce the risk of inquiry

GB Wear safety goggles!

GB Wear ear-muffs!

GB Wear a breathing mask!

Unpacking

• Open the packaging and remove the device care-

fully.

• Remove the packaging material as well as the pack-

aging and transport bracing (if available).

• Check that the delivery is complete.

• Check the device and accessory parts for transport

damage.

• If possible, store the packaging until the warranty

period has expired.

ATTENTION

The device and packaging materials are not toys!

Children must not be allowed to play with plastic

bags, lm and small parts! There is a risk of swal-

lowing and suffocation!

Proper use

The tool is designed for drilling with hammer action in

concrete, rock and brick, as well as for chiseling work,

always using the respective correct drill or chisel bit.

The equipment is to be used only for its prescribed

purpose. Any other use is deemed to be a case of mi-

suse. The user / operator and not the manufacturer will

be liable for any damage or injuries of any kind caused

as a result of this.

Please note that our equipment has not been designed

for use in commercial, trade or industrial applications.

Our warranty will be voided if the machine is used in

commercial, trade or industrial businesses or for equi-

valent purposes.

Safety information

General safety instructions for electric tools

m CAUTION: Read all safety regulations and ins-

tructions. Any failures made in following the safety

regulations and instructions may result in an electric

shock, re and/or serious injury.

Keep all safety regulations and instructions in a

safe place for future use.

The term “electric tool” used in the safety instructions

refers to electric tools operated from the mains power

supply (with a power cable) and to battery operated

electric tools (without a power cable).

Workplace safety

• Keep your work area clean and well illuminated.

Untidy or unlit work areas can result in accidents.

• Do not operate the electric tool in an environ-

ment where there is a risk of explosions and

where there are inammable liquids, gases or

dust. Electric tools produce sparks which could set

the dust or vapours alight.

• Keep the electric tool out of the reach of child-

ren and other persons. If there is a distraction, you

may lose control of the appliance.

Electrical safety

• The connector plug from this electric tool must

t into the socket. The plug should never be alte-

red in any way. Never use adapter plugs together

with earthed electric tools. Unaltered plugs and

correct sockets reduce the risk of an electric shock.

• Avoid bodily contact with earthed surfaces such

as pipes, heating, ovens and fridges. The risk of

electric shock is increased if your body is earthed.

• Keep the tool out of the rain and away from

moisture. The ingress of water into an electric tool

increases the risk of an electric shock.

Introduction

MANUFACTURER:

scheppach

Fabrikation von Holzbearbeitungsmaschine GmbH

Günzburger Straße 69

D-89335 Ichenhausen

DEAR CUSTOMER,

We hope your new tool brings you much enjoyment and

success.

NOTE:

According to the applicable product liability laws, the

manufacturer of the device does not assume liability

for damages to the product or damages caused by the

product that occurs due to:

• Improper handling,

• Non-compliance of the operating instructions,

• Repairs by third parties, not by authorized service

technicians,

• Installation and replacement of non-original spare

parts,

• Application other than specied,

• A breakdown of the electrical system that occurs due

to the non-compliance of the electric regulations and

VDE regulations 0100, DIN 57113 / VDE0113.

WE RECOMMEND:

Read through the complete text in the operating instruc-

tions before installing and commissioning the device.

The operating instructions are intended to help the user

to become familiar with the machine and take advan-

tage of its application possibilities in accordance with the

recommendations. The operating instructions contain

important information on how to operate the machine

safely, professionally and economically, how to avoid

danger, costly repairs, reduce downtimes and how to in-

crease reliability and service life of the machine.

In addition to the safety regulations in the operating

instructions, you have to meet the applicable regula-

tions that apply for the operation of the machine in your

country. Keep the operating instructions package with

the machine at all times and store it in a plastic cover

to protect it from dirt and moisture. Read the instruction

manual each time before operating the machine and

carefully follow its information. The machine can only be

operated by persons who were instructed concerning the

operation of the machine and who are informed about

the associated dangers. The minimum age requirement

must be complied with. In addition to the safety require-

ments in these operating instructions and your country’s

applicable regulations, you should observe the generally

recognized technical rules concerning the operation of

woodworking machines.

Device Description (Fig.1)

1. Dust guard

2. Locking sleeve

3. Selector switch for hammer drilling/chiseling

4. ON/OFF switch

5. Handle

6. Status indicator

7. Power cable

8. Additional handle

9. Depth stop

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DH1000PLUS in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 3.18 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DH1000PLUS Manual

Product: