782187
9
Zoom out
Zoom in
Previous page
1/92
Next page
10 english
• Considerworkareaenvironment.Donotexposetoolsto
rain.Donotusetoolsindamporwetlocations.Keep
work area welllit. Do not use tools in the presence ot
ammableliquidsorgases.
• Guardagainst electric shock.Avoidbody contact with
earthed or grounded surtaces
• Keep other people away. Do not let others, especially
children, not involved in the work touch the tool or the
extension lead and keep them away from the work area.
• Storeidletools.Whennotinuse,toolsshouldbestored
in a dry locked-up place, out of reach of children.
• Donotforcethetool.Itwilldothejobbetterandsafer
at the rate for which it was intended.
• Usetherighttool.Donotforcesmalltoolstodothejob
of a heavy duty tool. Do not use tools tor purposes not
intended; for example do not use circular saws to cut
tree limbs or logs.
• Dressproperly.Donotwearlooseclothingorjewellery
theycanbecaughtinmovingparts.Nonskidfootwearis
recommended when working outdoors. Wear protective
hair covering to contain long hair.
• Useprotectiveequipment.Usesafetyglasses.Useface
or dust mask if cutting operations create dust.
• Connectdustextractionequipment.Ifdevicesareprovid
ed for the connection of dust extraction and collecting
equipment, ensure these are connected and properly
used.
• Donot abuse thelead. Neverpull the powercable to
disconnectitfromthesocket.Keeptheleadawayfrom
heat, oil and sharp edge.
• Secure work. Where possible use clamps or a vice to
holdthework.It’ssaferthanusingyourhand.
• Don’toverreach.Keepproperfootingandbalanceatall
time.
• Maintaintoolswithcare.Keepcuttingtoolssharpand
clean for better and safer performance. Follow in struc-
tions for lubricating and changing accessories. Inspect
power cables periodically and if damaged have them
replaced by an authorised service facility. Inspect exten-
sioncablesperiodicallyandreplaceifdamaged.Keep
handles dry, clean and free from oil and grease.
• Disconnecttools.Whennotinuse,beforeservicingand
when changing accessories such as blades, bits, cutters,
disconnect tools from the power supply.
• Remove adjusting keys and wrenches. Form the habit
of checking to see that keys and adjusting wrenches are
removed from the tool before turning it on.
• Avoidunintentionalstarting.Ensureswitchisin‘off’po-
sition when plugging in.
• Useoutdoorextensionleads.Whenthetoolisusedout
doors, use only extension leads intended for outdoor use
and so marked.
• Stayalert.Watchwhatyouaredojng,usecommonsense
and do not operate the tool when you are tired.
• Checkdamagedparts.Beforefurtheruseof thetools,
it should be carefully checked to determine that it will
oper ate properly and perform its intended function.
Checkthealignmentofmovingparts,bindingofmoving
parts, break age of parts, mounting and any other condi-
tions that may affect its operation. A guard or other part
that is damaged should be properly repaired or replaced
by an authorised service centre unless other wise indicat-
ed in this instruction manual. Do not use the tool if the
switch does not turn on and off.
• Warning.Theuseofanyaccessoryorattachmentother
than one recommended in this instruction manual may
present a risk of personal injury.
• Haveyourtoolrepairedbyaqualiedperson.Thiselec
trictoolcomplieswiththerelevantsafetyrules.Repairs
shouldonlybecarriedoutbyaqualiedpersonusing
original spare parts, otherwise this may result in consid-
erable danger to the user.
Additional Safety Rules for Scroll Saws
• Thisscrollsawisintendedforuseindryconditions,and
for indoor use only.
• Donotcutpiecesofmaterialtoosmalltoholdbyhand
outside the blade guard.
• Avoidawkwardhandpositionswhereasuddenslipcould
cause a hand to move into the blade.
• Alwaysusethebladeguardtoavoidpossibleinjurydue
to blade breakage.
• Neverleavethescrollsawworkareawiththepower01),
or before the machine has come to a complete stop.
• Donotperformlayout,assemblyorsetupworkonthe
table while the cutting tool is in operation.
• Neverturnyourscrollsawonbeforeclearingthetable
ofallobjects:(tools,scrapsofwood,etc)exceptforthe
workpiece and related feed or support devices for the
operation planned.
m Proper use
CE tested machines meet all valid EC machine guidelines as
well as all relevent guidelines for each machine.
• Themachinemustonlybeusedintechnicallyperfect
con dition in accordance with its designated use and the
in structions set out in the operating manual, and only
by safety-conscious persons who are fully aware of the
risks involved in oerating the machine. Any functional
dis orders, especially those affecting the safety of the
machine,sholudtereforeberectiedimmediately.
• The safety, work and maintenance instructions of the
manufacturer as well as the technical data given in the
calibrations and dimensions must be adhered to.
• Relevant accident prevention regulations and other,
gene rally recognized safety-technical rules must also be
adhered to.
• Themachinemayonlybeused,maintained,andoperat-
ed by persons familiar with it and instructed in its opera-
tion and procedures. Arbitrary alterations to the machine
release the manufacturer from all responsibility for any
resulting damages.
• Themachinemayonlybeusedwithoriginalaccessories
and tools made by the manufacturer.
• Anyotheruseexceedsauthorization.Themanufacturer
is not responsible for any damages resulting from un-
authorized use; risk is the sole responsibility of the op-
erator.
m Remaining hazards
The machine has been built using modern technology in accor-
dance with recognized safety rules. Some remaining hazards,
how ever, may still exist.
• Long hair and loose clothing can be hazardous when
the work piece is rotating. Wear personal protective gear
suchasahairnetandtightttingworkclothes.
• Sawdustandwoodchipscanbehazardous.Wearper
so nal protective gear such as safety goggles and a dust
mask.
• Theuseofincorrectordamagedmainscablescanlead
to injuries caused by electricity.
• Even when all safety measures are taken, some re-
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach Deco-Tronic at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach Deco-Tronic in the language / languages: All languages as an attachment in your email.

The manual is 2.91 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info