781451
17
Zoom out
Zoom in
Previous page
1/64
Next page
www.scheppach.com GB | 17
Safe work
Warning: When power tools are used, basic safety
precautions must be followed to eliminate the risks
of re, electric shock and injury to persons.
Follow all these instructions before and while work-
ing with the machine.
Store these safety instructions safely.
Protect yourself from electric shock! Avoid physical
contact with earthed parts.
Unused devices should be stored in a dry, locked
place and out of reach of children.
Keep tools sharp and clean in order to be able to
work better and more safely.
Check the cable of the tool regularly and have it re-
placed by a recognised specialist when damaged.
Check extension cables regularly and replace them
when damaged.
Only use extension cables that have been approved
and appropriately labelled for use outdoors.
Pay attention to what you are doing. Remain sen-
sible when working. Do not use the tool when you
are fatigued.
Do not use any tools on which the switch cannot be
switched on and o󰀨.
Warning! The use of other insertion tools and other
accessories can entail a danger of injury.
Pull out the mains plug for any adjustment or repair
tasks.
Pass the safety instructions on to all persons who
work on the machine.
Before commissioning, check that the voltage on the
device type plate corresponds to the mains voltage.
If an extension cable is required, make sure that its
cross-section is su󰀩cient for the current consump-
tion of the device. Minimum cross section 1.5 mm2.
Only use the cable drum when unrolled.
Check the mains connection cable. Never use any
faulty or damaged connection cables.
Do not use the cable to pull the plug out of the outlet.
Protect the cable from heat, oil and sharp edges.
Do not expose the machine to rain and do not use
the machine in a damp or wet environment.
Ensure good lighting.
Do not use in the vicinity of combustible uids or
gases.
When working outdoors, anti-slip footwear is rec-
ommended. Tie long hair back in a hair net. Avoid
abnormal posture
The operating person must be at least 18 years of
age; trainees must be at least 16 years, however
only under supervision.
The machine is intended for commercial use, for ex-
ample in hotels, schools, hospitals, factories, shops,
o󰀩ces and rental businesses.
Please observe that our equipment was not de-
signed with the intention of use for industrial pur-
poses. We assume no guarantee if the equipment
is used in industrial applications, or for equivalent
work.
Check the lter regularly for damage. Replace dam-
aged lters! Regularly check the housing seal and
the seals for the lter and dust bag.
When using the cleaning nozzles, do not suck up
any foreign bodies such as screws, nails, pieces of
plastic or wood.
The machine may only be operated with original
parts and original accessories from the manufac-
turer.
The suction of wood dust and wood chippings in
commercial areas is not permitted.
The suction of ammable liquids or dusts hazardous
to health is not permitted.
Only suitable for collecting chips (not dust).
Any use beyond this is improper use. The manufac-
turer is not responsible for the resulting damages;
the user solely bears the risk.
The safety, operating and maintenance specica-
tions of the manufacturer, as well as the dimensions
specied in the technical data, must be observed.
The applicable accident prevention regulations and
the other generally accepted safety rules must be
observed.
The machine may only be used, maintained or re-
paired by persons who are familiar with it and have
been informed of the dangers. Any liability of the
manufacturer for damages resulting from arbitrary
changes to the machine is excluded.
The machine may only be operated with original ac-
cessories from the manufacturer.
5. Safety instructions
m Attention! The following basic safety measures
must be observed when using electric tools for pro-
tection against electric shock, and the risk of injury
and re. Read all these notices before using the elec-
tric tool and store the safety instructions well for later
reference.
17


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach DC100 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DC100 in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info