782123
15
Zoom out
Zoom in
Previous page
1/124
Next page
international 15
• The manufacture‘s safety, working, and maintenance
instructions, as well as the dimensions stated in the
technical specifications, must be observed.
The applicable accident prevention regulations and
other generally accepted rules concerning safety must
be obeyed.
• The machine may only be operated, serviced, or re-
paired by persons familiar with it and aware of the
risks. Arbitrary modifications of the machine exclude
any liability of the manufacturer for damage arising from
this.
The machine may only be used with original accessories
from the manufacturer.
m Remaining hazards
The machine was designed according to the state of the art
and accepted safety standards. However, remaining risks
might occur during work.
There is a health risk from wood shavings. It is absolutely
essential to wear personal protective equipment such as
eye protection and a dust mask.
There is the possibility of inhaling dust when you close or
replace the filter bag. Ignoring the operating instructions
concerning the disposal (e.g. the prescribed use of dust
masks P2) might lead to the inhalation of dust.
There is a health risk due to high noise levels. During
operation the permitted noise level will be exceeded.
It is absolutely essential to wear personal protection
equipment such as hearing protection.
There is an electrical hazard when improper electrical
connecting cables are being used.
Furthermore there might be non-obvious residual risks
despite all precautions.
Remaining risks can be minimized by observing the
„Safety Instructions“ and the „Intended Use“ as well as
the operating instruction in their entirety.
Assembly
For packaging reasons your machine is not entirely assem-
bled.
Take the Dust collector out of the packing.
Release the locking strap and remove the motor casing.
Fig. 2
In the container you will find all the components of the
Dust collector system.
Take all parts out and check for completeness.
1 Filter cartridge
2 Filter bag
3 Suction hose
4 2 hose clamps
5 Hose coupling ø 100 mm
Les consignes de sécurité, de travail et d’entretien du
fabricant, ainsi que les dimensions indiquées dans les
caractéristiques techniques sont à respecter.
Les consignes de prévention des accidents correspon-
dantes ainsi que les consignes d’ordre générale tou-
chant à la sécurité doivent tre respectées.
La machine ne peut tre utilisée, entretenue ou réparée
que par des personnes connaissant son fonctionnement
et étant informées des dangers. Des modifications non
autorisées de la machine excluent la responsabilité du
fabricant concernant les dommages pouvant en décou-
ler.
La machine doit tre utilie uniquement avec des ac-
cessoires originaux du fabricant.
m Risques résiduels
La machine a été construite selon l’état de la technique et
les règles technique, de sécurité reconnues. Malgré tout
des risques résiduels peuvent survenir pendant le travail.
La poussi re ou les copeaux de bois représentent un
risque pour la santé. Il est indispensable de porter un
équipement de protection tels que des lunettes de pro-
tection et un masque anti-poussi re.
Une aspiration de la poussi re est possible pendant la
fermeture ou le changement du sac collecteur de poussi
re. Si les consignes de traitement de déchets ne sont
pas respectées (p.ex. le port de masque anti-poussi re
P2) cela peut amener une aspiration de poussi re.
Le bruit représente un risque pour la santé. Pendant
l’utilisation, le niveau sonore autorisé est dépassé. Il est
indispensable de porter un équipement de protection
tel qu’un prot ge oreille.
Risques dus au courant électrique si les lignes de cou-
rant électrique ne sont pas réglementaires.
Des risques résiduels non apparents peuvent exister,
malgré toutes les précautions prises.
Les risques résiduels peuvent tre minimisés si les
«conseils de sécurité» et «l’utilisation conforme» ainsi
que le mode d’emploi sont suivis.
Montage:
Pour des raisons d’emballage, la machine n’est pas montée
complètement.
Sortez l’unité d’aspiration de l’emballage.
Ouvrez la sangle de fermeture et enlevez le boîtier.
Fig. 2
Dans le boîtier se trouvent tous les accessoires de l’unité
d’aspiration.
Sortez les accessoires et vérifiez s’ils sont complets.
1 cartouche de filtre
2 sac de filtre
3 Tuyau d’aspiration
4 2 colliers de serrage
5 Manchon d’assemblage ø 100 mm
15


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach DC 04 Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DC 04 Woodster in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3.79 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info