Manual Scheppach DC 04 Woodster (page 11 of 124) (English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish)

782123

Zoom out

Zoom in

1/124

international 11

• Protect the cable from heat, oil and sharp edges.

• Do not leave the machine in the rain and never use

it in damp or wet conditions.

• Provide good lighting.

• Do not saw near ﬂammable liquids or gases.

• Non-slip shoes are recommended when working out-

doors.

• Wear a hair net if you have long hair.

• Avoid abnormal working postures.

• Operators have to be at least 18 years of age.

• Trainees of at least 16 years of age are allowed to

use the machine under supervision.

• Keep children away from the machine when it is con-

nected to the power supply.

• Keep your workplace clean of wood scrap and any

unnecessary objects.

• An untidy work area invites accidents.

• Do not allow other persons, especially children, to

touch the tool or cable.

• Keep them out of your work area.

• Persons working on the machine should not be dis-

tracted.

• Carry out conversions, adjustments, measurements

and cleaning jobs only when the motor is switched

off. - Pull out the power plug!

• Before switching on, make sure that all keys and

wrenches have been removed from the tool.

• Switch off the motor and pull out the power plug

before you leave the workplace.

• Reﬁt all guards and safety devices immediately after

you have completed any repairs or maintenance work.

• Be sure to observe the safety information and op-

erating and maintenance instructions issued by the

manufacturer, as well as the dimensions listed in the

Technical Data.

• It is imperative to observe the accident prevention

regulations in force in your area as well as all other

generally recognized rules of safety.

• Note the information published by your professional

associations.

• Do not use any low-powered machines for heavy duty

work.

• Do not mis-use the cable Make sure you stand

squarely and keep your balance at all times.

• Check that the moving parts are in good working

order, that they do not jam, and that no parts are

damaged.

• Make sure that all parts are ﬁtted correctly and that

all other operating conditions are properly fulﬁlled.

• Unless otherwise stated in the operating instruc-

tions, damaged safety devices and parts have to be

repaired or replaced by an authorized service center.

• Have damaged switches replaced by a customer ser-

vice workshop.

• This electric tool complies with the pertinent safety

regulations.

• Repairs are to be carried out only by a qualiﬁed elec-

trician using original replacement parts or the user

may suffer an accident.

• If necessary, wear suitable personal protection equip-

ment. This could consist of:

- Ear-muffs to prevent the risk of damaging

your hearing

- A breathing mask to prevent the risk of in-

haling hazardous dust The operator has to be

informed about the conditions with an inﬂu-

ence on noise development.

prise.

• Protégez le câble de la chaleur, contre tout contact

avec de l huile et des arêtes acérées.

• N exposez pas la machine à la pluie et ne l utilisez pas

dans un environnement humide ou mouillé.

• Veillez à un bon éclairage.

• Ne sciez pas à proximité de ﬂuides ou de gaz

combustibles.

• Lors de travaux en plein air, il est recommandé de

porter des chaussures antidérapantes.

• Portez un ﬁlet à cheveux pour les cheveux longs.

• Evitez une tenue anormale du corps La personne

opératrice doit avoir au moins 18 ans, les stagiaires

au moins. 16 ans, cependant uniquement sous

surveillance.

• Tenir les enfants à l écart des appareils raccordés au

réseau.

• Maintenez votre lieu de travail sans déchets de bois et

pièces éparpillées.

• Le désordre du lieu de travail peut entraîner des

accidents.

• Ne laissez aucune autre personne toucher l outil ou le

câble, ceci est en particulier valable pour les enfants.

• Tenez-les à l écart de votre poste de travail. Il ne faut

pas détourner l attention de personnes travaillant sur

la machine.

• Effectuez les changements d équipement ainsi que

les travaux de réglage, de mesure et de nettoyage

uniquement lorsque le moteur est mis hors circuit. -

• Tirez la ﬁche de contact - Contrôlez, avant la mise en

circuit, que les clés et les outils de réglage sont bien

retirés.

• En sortant de votre poste de travail, mettez le moteur

hors circuit et retirez la ﬁche de contact.

• Tous les dispositifs de protection et de sécurité

doivent être remis en place dès la réparation ou la

maintenance terminée.

• Les consignes de sécurité, de fonctionnement et de

maintenance du producteur, ainsi que les dimensions

indiquées dans les caractéristiques techniques

doivent être respectées.

• Les prescriptions de prévention contre les accidents

en rapport et les autres règles reconnues de façon

générale du point de vue de la technique de sécurité

doivent être respectées.

• N utilisez aucun outil trop faible pour des travaux

difﬁciles.

• N utilisez pas le câble à des ﬁns pour lesquelles il n

est pas conçu!

• Veillez à vous tenir de façon sûre, et gardez à tout

moment l équilibre.

• Contrôlez si la fonction des pièces mobiles est

correcte, si elles ne sont pas grippées ou si certaines

pièces sont abîmées.

• Toutes les pièces doivent être correctement montées

et toutes les conditions remplies pour assurer un

fonctionnement impeccable de l outil.

• Les dispositifs de protection et les pièces abîmées

doivent être réparées dans les règles de l art par un

atelier de service après vente dûment homologué ou

être échangés si rien d autre n est indiqué dans le

mode d emploi.

• Faites remplacer les interrupteurs abîmés par un

atelier de service après-vente.

• Cet outil électrique correspond aux règlements de

sécurité correspondants.

• Les réparations doivent uniquement être effectuées

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach DC 04 Woodster in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.

The manual is 3.79 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach DC 04 Woodster Manual

Product: