781405
38
Zoom out
Zoom in
Previous page
1/140
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
38 | GB
5. m Risk of explosion!
Never use the machine in rooms with easily am-
mable substances.
6. During transport, secure the tool against sliding
and tilting.
7. Ensure that no fuel is spilled on the motor or the
exhaust during refuelling.
8. Repairs and setting work must be carried out by
authorised specialists.
9. Do not touch mechanically moving or hot parts.
Do not remove protective covers.
10. The values specied in Technical Data under
sound power level (LwA) and sound pressure level
(LpA) are emission levels and do not necessarily
represent safe working levels. As there is a con-
nection between emission and immission levels,
it cannot be used reliably to determine potential-
ly required, additional safety measures. Factors
inuencing the current employee‘s immission lev-
el include characteristics of the working environ-
ment, other noise sources etc. such as the number
of machines and other nearby processes and the
time frame the user is exposed to the noise. The
reliable immission level can also vary by country.
However, this information will give the machine‘s
user the opportunity to carry out a better risk as-
sessment.
11. Never put objects into the venting slots. This also
applies when the machine is turned o󰀨. Non-com-
pliance can cause injuries or damage to the ma-
chine.
12. Keep the tool free from oil, dirt and other contam-
inants.
13. Ensure that sound absorbers and air lters func-
tion properly. These parts act as ame protection
in the event of misre.
14. Turn o󰀨 the motor:
- Whenever you leave the machine
- Before refuelling.
15. Never use the choke lever to stop the motor.
5.4 Safety functions of the chainsaw (Fig.1)
1 SAW-CHAIN WITH LOW KICKBACK helps you
with specially developed safety devices to reduce
kickback forces so you can absorb them better.
3 FRONT HAND GUARD protects the left hand of
the operator if it slides o󰀨 the front handle when the
saw is running.
3 CHAIN BRAKE is a safety function to reduce in-
jury based on kickback by stopping a running saw-
chain within milliseconds. It is activated by the
FRONT HAND GUARD.
8 THROTTLE TRIGGER LOCKOUT prevents ac-
cidental acceleration of the motor. The throttle can
be activated only when the throttle trigger interlock
is pressed.
5.3 Safety notices for handling ammable fuels
1. WARNING!: Petrol is easily ammable!
2. Store petrol in containers that have been de-
signed specially for this purpose.
3. Rell with petrol when you are outdoors, and do
not smoke.
4. Rell with petrol before starting the motor. Nev-
er remove the fuel tank ller cap or rell with pet-
rol while the motor is running or when it is still hot.
5. When fuel has been spilled, do not start the mo-
tor but remove the machine from the area of the
spilled fuel and avoid all ignition sources until all
petrol fumes have dispersed. Put the cap back
securely on the fuel tank and on the canister.
Refuelling
Turn o󰀨 the motor before refuelling.
m CAUTION! Always open the fuel ller cap care-
fully so the existing pressure can be released slow-
ly.
High temperatures are generated on the casing
during work. Before refuelling, allow the machine
to cool down fully.
m CAUTION! If the machine has not cooled down
su󰀩ciently, the fuel could ignite during refuelling
and cause severe burns.
Ensure that the tank is not overlled. If you spill
any fuel, it has to be wiped away immediately and
the machine must be cleaned.
Always close the screw plug on the fuel tank prop-
erly, so loosening is prevented from vibrations dur-
ing operation.
m DANGER
Never refuel the machine close to an open ame.
Special safety regulations for the use of internal
combustion motors
m DANGER
Internal combustion motors are a particular danger
during operation and refuelling. Always read and fol-
low the warnings. Non-compliance can lead to se-
vere and even lethal injuries.
1. Do not make any modications to the machine.
2. m CAUTION!
Risk of poisoning, Exhaust fumes, fuel, Lubri-
cating oil vapor, sawdust and lubricants are poi-
sonous. Exhaust fumes must not be inhaled.
3. m CAUTION!
Risk of burns!, Do not touch the exhaust system
and the drive motor.
4. Do not use the machine in unventilated rooms or
easily ammable environments.
Heruntergeladen von manualslib.de Handbücher-Suchmachiene
38


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach CSH56 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach CSH56 in the language / languages: English, German, French as an attachment in your email.

The manual is 10.15 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info