781410
26
Zoom out
Zoom in
Previous page
1/200
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
26 | GB
4. Intended use
The machine meets the currently valid EU machine
directive.
Before starting any work, all protective and safety de-
vices must be in place.
The machine has been designed to be operated by
one person.
The operator is responsible for third parties in the
area of operations.
All safety and hazard notices on the machine must
be observed.
All safety and hazard notices on the machine must
be kept in a completely legible condition.
Use the machine in a technically awless condition
only, as well as for its intended purpose, in a safe
manner and being aware of dangers, in compliance
with the operating instructions!
Disruptions which can affect safety in particular
must be eliminated straight away!
The manufacturer’s safety, operation and main-
tenance instructions as well as the technical data
given in the calibrations and dimensions must be
adhered to.
Relevant accident prevention regulations and other
generally recognized safety and technical rules
must also be adhered to.
The machine may only be used, maintained or re-
paired by trained persons who are familiar with the
machine and have been informed about the dan-
gers. Unauthorized modications of the machine
exclude a liability of the manufacturer for damages
resulting from the modications.
The machine is intended for use only with original
spare parts and original tools from the producer.
Any other use is considered to be not intended. The
manufacturer excludes any liability for resulting
damages, the risk is exclusively borne by the user.
The device must not be used for commercial, tech-
nical or industrial applications.
If you are not sure whether working conditions are
safe or unsafe, do not work with the machine.
The chainsaw has been designed to cut wood and
smaller trees with a diameter not bigger than the
chain bar length.
Warning!
For your own safety, please thoroughly read this man-
ual and the general safety instructions before turning
the device on. If you give the device to third parties,
always include these instructions.
Please note that our equipment has not been de-
signed for use in commercial, trade or industri-
al applications. Our warranty will be voided if the
equipment is used in commercial, trade or industrial
businesses or for equivalent purposes.
5. Safety information
Please read all instructions before working with
this tool.
When using electric tools basic safety precautions
should always be followed to reduce the risk of re,
electric shock and personal injury.
Please read all instructions and warnings carefully.
Non-compliance with instructions and warnings can
lead to electric shock, re and/or serious injuries.
Please store instructions and warnings safely. The
term "device" refers to electrically operated devices,
either powered by mains operation (with mains cable)
or battery powered (without mains cable).
General notes on safety
Before you do any work with the electric chainsaw,
make yourself familiar with all operating parts.
Practise using the saw (sawing logs on a saw-
horse) and get an experienced user or a specialist
to explain to you the function of the saw, the way of
working, the techniques of sawing and the personal
protection equipment.
Observe the noise protection and local regulations
for woodcuts.
Local regulations may require a qualifying exami-
nation. Contact the forest administration.
General safety instructions for power tools
1. Work area safety
Keep work area clean and well lit. Cluttered or
dark areas invite accidents.
Do not operate power tools in explosive atmos-
pheres, such as in the presence of ammable
Iiquids, gases or dust. Power tools create sparks
which may ignite the dust or fumes.
Keep children and bystanders away while op-
erating a power tool. Distractions can cause you
to lose control.
2. Electrical safety
Power tool plugs must match the outlet. Nev-
er modify the plug in any way. Do not use any
adapter plugs with earthed (grounded) power
tools. Unmodied plugs and matching outlets will
reduce risk of electric shock
Avoid body contact with earthed or grounded
surfaces, such as pipes, radiators, ranges and
refrigerators. There is an increased risk of electric
shock if your body is earthed or grounded.
Do not expose power tools to rain or wet condi-
tions. Water entering a power tool will increase the
risk of electric shock.
26


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach CSE2500 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach CSE2500 in the language / languages: English, German, Dutch, French, Italian, Polish, Spanish as an attachment in your email.

The manual is 8.36 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info