Manual Scheppach CRS450-20ProS (page 19 of 76) (English, German, French, Polish)

781445

Zoom out

Zoom in

1/76

 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58 www.scheppach.com  service@scheppach.com  +(49)-08223-4002-99  +(49)-08223-4002-58

19 | GB

ADDITIONAL SAFETY WARNINGS

Caution: Risk of injury and damage to property!

• Do not use any blunt or bent blades or blades which

are damaged in any other way.

• Before sawing the work piece, check for hidden for-

eign objects such as nails, screws. These must be

removed.

• Always insert a suitable saw blade.

• Secure the work piece with the aid of clamping de-

vices on the workbench.

• Apply only as much pressure as is required for

sawing. If there is excessive pressure, the sawing

blade may bend and break.

• Switch the device off immediately if the sawing

blade jams. Spread the saw cut out and pull the

blade out carefully.

• Always stand to the side of the saw when working.

• Always make sure that the workplace is well ven-

tilated.

• Avoid over-stressing the device while working.

Careful handling and use of battery devices

• Charge the batteries only in chargers that are

recommended by the manufacturer. Risk of re

if a charger that is suitable for a specic type of

battery is used with other batteries.

• In the power tools, use only the batteries de-

signed for the purpose. The use of other batter-

ies may result in injuries and risk of re.

• Keep the unused battery away from paper

clips, coins, keys, nails, screws and other small

metal objects, which could cause bridging of

the contacts. A short circuit between the battery

contacts may cause burns or re.

• If used incorrectly, liquid may leak from the

battery. Avoid contact with this. In the event of

accidental contact, rinse off with water. If the

liquid gets into eyes, seek medical assistance.

Leaking battery uid may cause skin irritations

or burns.

• Ensure that the device is switched off before

inserting the battery. Inserting a battery into a

power tool that is switched on may result in acci-

dents.

• Recharge the batteries indoors only because

the battery charger is designed for indoor use

only. Risk of electric shock.

• To reduce the electric shock hazard, unplug the

battery charger from the mains before cleaning

the charger.

• Do not subject the battery to strong sunlight

over long periods and do not leave it on a heat-

er. Heat damages the battery and there is a risk of

explosion.

• Allow a hot battery to cool before charging.

c) Disconnect the plug from the power source

and/or remove the battery pack, if detachable,

from the power tool before making any ad-

justments, changing accessories, or storing

power tools. Such preventive safety measures

reduce the risk of starting the power tool acciden-

tally.

d) Store idle power tools out of the reach of chil-

dren and do not allow persons unfamiliar with

the power tool or these instructions to oper-

ate the power tool. Power tools are dangerous in

the hands of untrained users.

e) Maintain power tools and accessories. Check

for misalignment or binding of moving parts,

breakage of parts and any other condition

that may affect the power tool’s operation. If

damaged, have the power tool repaired before

use. Many accidents are caused by poorly main-

tained power tools.

f) Keep cutting tools clean and sharp. Properly

maintained cutting tools with sharp cutting edges

are less likely to bind and are easier to control.

g) Use the power tool, accessories and tool bits

etc. in accordance with these instructions,

taking into account the working conditions

and the work to be performed. Use of the power

tool for operations different from those intended

could result in a hazardous situation.

h) Keep handles and grasping surfaces dry,

clean and free from oil and grease. Slippery

handles and grasping surfaces do not allow for

safe handling and control of the power tool in un-

expected situations.

5) Service

a) Have your power tool serviced by a qualied

repair person using only identical replace-

ment parts. This will ensure that the safety of the

power tool is maintained.

Safety instructions for reciprocating saws

• When performing work during which the elec-

trical tool can meet with concealed power lines

or its own power cord, hold the electrical tool

by the insulated handle surfaces. Contact with a

live power line can also electrify metal device parts

and lead to an electric shock.

• Fasten and secure the workpiece to a stable

base using clamps or other means. If the work-

piece is held only by hand or against the body, it

remains unstable, which may result in a loss of con-

trol.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach CRS450-20ProS in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 4.35 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach CRS450-20ProS Manual

Product: