782064
23
Zoom out
Zoom in
Previous page
1/120
Next page
23
Placez le haut des vis à tête ronde à travers l’ouverture
dans les rainures de la table.
Ajustez le collier de butée de façonnage à la position du-
rée et resserrez les écrous de serrage.
Montage du guide “anti-retour”
• Localiser à l’avant centre de la machine les 2 trous
(Fig. 13).
• Ensuite aligner le support de l’anti-retour face aux 2
trous (Fig. 14).
• Insérer les 2 vis et leurs rondelles dans les trous, puis
fixer fermement le support à l’aide d’un tournevis cru-
ciforme.
• Une fois fixé, installer l’anti-retour de sorte à le faire
coulisser et l’ajuster à l’épaisseur de la pièce à tra-
vailler.
• Ensuite fixez-le à l’aide des 2 vis papillon (Fig. 15).
Réglage de la profondeur du travail
Pour ajuster ou diminuer la hauteur de la course de
l’arbre (sert à ajuster la hauteur des fraises), tournez la
poignée (cf. schéma) selon que vous souhaitez diminuer
ou augmenter la hauteur.
Pour votre sécurité, dans la plupart des travaux à effec-
tuer, il est vivement conseillé de travailler avec le porte-
outils le plus bas possible par rapport à la surface de la
table.
Put the tops of the round head screws through the
opening in the table grooves.
Adjust the shaping stop collar to the desired position and
tighten the clamping nuts.
Fitting the return kick safety fence
• Locate the two holes at the centre of the machine
front (Fig. 13).
• Then align the anti-reversing safety fence with the two
holes (Fig. 14).
• Insert the two bolts and their washers into the holes,
then tighten them firmly with a four-way socket wrench.
• After that, install the fence in such a way that it can
slide and be adjusted to the thickness of the work
piece.
• After setting, fix it with the help of the two bolts (Fig.
15).
Fitting the working depth
For setting or reducing the spindle height (serves for
height-adjustment of the cutting knives), turn the handle
(see figure) in order to reduce or increase the height, as
required.
For your safety, with most jobs it is urgently recommend-
ed to use the cutter head with the smallest height in rela-
tion to the table top.
BA bs 53.indd 23 05.04.11 14:25
23


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach BS53 Woodster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach BS53 Woodster in the language / languages: English, German, Danish, French, Italian, Swedish, Finnish as an attachment in your email.

The manual is 6.33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info