Manual Scheppach BS 50 Woodster (page 19 of 130) (All languages)

782055

Zoom out

Zoom in

1/130

Fig. 5

• Introduire outil de réglage (a) dans l’évidement, tour-

ner dans le sens des aiguilles d’une montre et régler la

tête de fraisage complètement en haut (RAISE = haut,

Lower = bas)

Fig. 6, 7, 8

• Introduire le manchon de serrage dans la broche de frai-

sage et serrer légèrement à la main, introduire l’outil de

fraisage et (Fig. 6) et serrer à l’aide de la clé (b) (Fig. 7)

tout en pressant et maintenant le bouton de verrouillage

de la broche (Fig. 8) sous le plateau de la table.

Après le serrage, relâcher le bouton de verrouillage de la

broche.

Attention ! La longueur de serrage de l’outil de fraisage

doit correspondre au moins à 2/3 de la longueur de la

tige.

Fig. 5

• Put Adjustment tool (A) into the recess in a clock-

wise direction and turn head place completely upward

(RAISE = highly, Lower = ab)

Fig. 6, 7, 8

• Put Clamping sleeve into the milling spindle and push

in by hand, ﬁnger tighten milling tool (Fig. 6) and tight-

en with key (B) (Fig. 7), press and hold the spindle

locking knob (Fig. 8) under the work top.

After tightening, re-release the spindle locking knob.

Note! Clamping length of the spare part must amount to

at least 2/3 of the axis length.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach BS 50 Woodster in the language / languages: All languages as an attachment in your email.

The manual is 7.87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach BS 50 Woodster Manual

Product: