Manual Scheppach BS 50 Woodster (page 13 of 130) (All languages)

782055

Zoom out

Zoom in

1/130

• Avant de commencer le travail, s’assurer que tous les

dispositifs de protection et de sécurité sont montés sur

la machine.

• La machine est conçue pour être opérée par une seule

personne. A l’intérieur de la zone de travail, l’opérateur

est responsable vis-à-vis de tiers.

• Observer toutes les instructions de sécurité et de pro-

tection sur la machine.

• Conserver toutes les instructions relatives à la sécurité

et aux dangers sur la machine complètes et parfaite-

ment lisibles.

• Pour l’exécution standard de la machine, les dimen-

sions maximales des pièces à usiner ne doivent pas dé-

passer les dimensions de la table.

• Dans le cas de dimensions plus grandes des pièces à

usiner et qui permettent un basculement au bord du

plateau de la table, il y a lieu d’utiliser l’allongement de

table et/ou le chariot (accessoires spéciaux).

• En cas d’utilisation dans des locaux fermés, la machine

doit être équipée d’une installation d’aspiration.

• La machine ne doit être utilisée que si elle est tech-

niquement en parfait état. Elle doit être utilisée con-

formément à l’usage prévu, compte tenu des instruc-

tions d’utilisation et dans le respect des instructions de

sécurité ! éliminer (ou faire éliminer) immédiatement

surtout les pannes susceptibles de compromettre la sé-

curité !

• Il convient d’observer les prescriptions de sécurité, de

travail et de maintenance du fabricant ainsi que les

dimensions indiquées dans le caractéristiques techni-

ques.

• Il convient d’observer les prescriptions applicables de

prévention des accidents ainsi que les autres règles de

sécurité technique généralement reconnues.

• L’utilisation, la maintenance et la réparation de la ma-

chine sont réservées aux personnes qui la connaissent

bien et ont reçu une formation leur permettant d’ap-

précier les dangers. Toute modiﬁcation arbitraire de la

machine dégage le fabricant de sa responsabilité pour

les dommages pouvant être causés.

• La machine ne doit être utilisée qu’avec les accessoires

et outils d’origine en provenance du fabricant.

• Attention: L’emploi d’outils ou d’accessoires autres que

ceux spéciﬁés dans les instructions d’utilisation peut

entraîner des risques de blessure pour vous.

• Toute autre utilisation est considérée comme ne cor-

respondant pas à l’usage prévu. Le fabricant n’est pas

responsable des dommages en découlant ; l’utilisateur

seul en porte la responsabilité.

• Utiliser des dispositifs ou colliers de serrage pour main-

tenir la pièce à usiner. Cela est plus sûr que d’utiliser

les mains et vos deux mains restent libres pour con-

duire la machine.

• Ne vous penchez pas trop en avant.

• Toujours rester debout sur le sol et veiller à bien conser-

ver l’équilibre.

• Soyez toujours bien concentré sur votre travail. Faites

toujours prévaloir la raison. Ne travaillez pas sur la ma-

chine si vous êtes fatigué ou si vous êtes sous l’effet de

drogues ou d’alcool.

• Vériﬁer s’il y a des pièces endommagées sur la machine.

• Before starting work, all protection and safety devices

must be installed on the machine.

• The machine is to be operated by a person. The op-

erator in the work area is responsible against any third

person.

• Follow all safety and hazard instructions on the ma-

chine.

• Keep all safety and hazard instructions in a legible con-

dition on the machine.

• The maximum dimension of the work pieces which can

be worked on may not exceed the table size during the

standard version.

• With larger work piece dimensions, tipping of the bench

top is possible by table extension and/or using the roll

support (option).

• For work in closed areas the machine must be attached

to a ventilation system.

• Use the machine only in technically perfect as well as

intended condition following the safety and drive-con-

scious conditions of manual use! In particular, breaks

of safety must be impaired and immediately eliminated

(leave)!

• Safety -, Work and servicing instructions of the man-

ufacturer as well as the dimensions indicated in the

technical data must be maintained.

• The applicable rules for the prevention of accidents and

other generally recognized safety-relevant rules must be

followed.

• The machine may only be used or repaired by peo-

ple trusted and informed about the hazards. Arbitrary

changes to the machine exclude the responsibility of

the manufacturer for damage resulting from it.

• The machine may be used only with original accessories

and original tools from the manufacturer.

• Attention: The use of tools or accessories other than

those given in the operating instructions can mean a

danger of injury to you.

• Each use going beyond the instructions is not consid-

ered as intended. For damage resulting from such, the

manufacturer is not responsible; the risk for this is only

undertaken by the user.

• Use clamps or fastening clamps in order to hold the

work piece. This is safer than the use of hands and

allows both hands to remain free to operate the ma-

chine.

• Do not lean too far forward.

• Always stand ﬁrmly on the ground and maintain your

balance.

• Always concentrate on the work. Think. Do not work on

the machine if you are tired or under the inﬂuence of

drugs or alcohol.

• Examine the machine for damaged parts. If a safety

device or another part is damaged, check carefully

whether it is still functioning correctly before you con-

tinue working. Examine the escape of the mobile parts

and make free-up their movement. Make sure that no

breaks, tears or other conditions are present which can

impair functioning. A damaged safety device or other

damaged part must be repaired or replaced by a recog-

nized customer service partner as far as nothing differ-

ent is indicated in the operating instructions.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach BS 50 Woodster in the language / languages: All languages as an attachment in your email.

The manual is 7.87 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Scheppach BS 50 Woodster Manual

Product: