782038

Scheppach BHT560-40Li Manual

20
Zoom out
Zoom in
Previous page
1/76
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
20 | GB
3. Push the locking switch (6) forwards and activate
the on/off switch (7).
4. As soon as the tool is running, you can release
the locking switch (6).
Power off:
5. Release the safety switch (4) or on/off switch (7).
Working with the tool
During the cutting process, be careful not to touch any
objects such as wire fences or plant supports. This can
cause damage to the safety cutter bar.
• If the blade is jammed by a xed object, immediately
turn off the tool and remove the battery. Then remove
the object.
• Avoid over-stressing the device whilst working.
m ATTENTION!
If the cutting unit touches a foreign object, the operat-
ing noises get louder or the hedge trimmer vibrates
unusually excessively, stop the motor and allow the
hedge trimmer to come to a standstill. Remove the re-
chargeable battery and take the following measures:
• Check for damage
• Check for loose parts and secure all loose parts
• Replace damaged parts with similar parts or have
them repaired.
Settings on the hedge trimmer
Adjusting the rear handle (15)
The rear handle can be adjusted in 3 working positions
in order to guide the hedge trimmer easier.
While adjusting, the throttle (14) cannot be actuated.
1. Use the left hand to hold the hedge trimmer tight by
the front handle (3).
2. Press the button (13) and turn the handle into the
required position. (Fig. 03)
3. Release the button (13). Ensure that
4. the unlocking device re-engages and the handle is
afxed securely.
Cutting techniques
• Cut out thick branches with loppers before using the
hedge trimmer.
• The double-sided safety cutter bar enables cutting
in both directions or from one side to the other using
a pendulum movement.
• When cutting vertically, evenly move the hedge trim-
mer forwards or up and down in an arching move-
ment.
• When cutting horizontally, move the battery-powered
hedge trimmer in a sickle shape from the edge of the
hedge so that cut off branches can fall to the ground.
• In order to cut long straight lines, we recommend
setting up a string line.
• Have the equipment checked if necessary.
• Switch off the equipment when not in use.
• Wear gloves
7. Before starting the equipment
Unpack the device and check it for complete delivery
contents and transport damage.
NOTE
The batteries (optional; depending on the delivery
scope) are not fully charged on delivery. Before rst
use, fully charge the batteries. See charger instruc-
tion manual.
Removing / inserting the battery(Fig. 2)
1. To remove the battery (9) from the appliance,
press the release button (11) on the battery and
pull out the battery.
2. To insert the battery (9), place it on the guide
track and push it back into the appliance. It will
audibly snap in.
8. Operation
Wear appropriate clothing and safety gloves when
working with this tool. Wear eye and hearing protec-
tion. Before each use, ensure that the unit is work-
ing properly.
The on/off switch and the safety switch must not be
locked. When the switch is released, the motor must
turn off. If a switch is damaged, the tool must not be
used. Personal Protective Equipment and a properly
functioning device will lower the risk of injuries and
accidents.
Comply with noise protection and local stipulations.
m ATTENTION!
Do not use the hedge trimmer with a faulty or
heavily worn cutting unit.
Removing the blade guard:
1. Before turning on the device, remove the blade
guard (10) from the cutter bar (2).
Turning the device on and off
Find safe footing and hold the tool securely with both
hands and at a distance from your body. Before turn-
ing on the unit, make sure that the blades are not
touching anything. Ensure that the hedge trimmer
is properly in the prescribed working position before
starting the motor.
Power on:
1. Ensure that the battery (9) has been inserted (see
“Removing/inserting the battery”).
2. Press the safety switch (4) on the front handle (5).
… 20 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach BHT560-40Li at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach BHT560-40Li in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 4.19 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info