Length/width/height mm ....................................................................................................2060x1050x1150
Bench size mm ...............................................................................................................................840x640
Working height mm .................................................................................................................................900
Sawband mm .........................................................................................................................20x0,45x4425
Band wheel diameter mm .......................................................................................................................600
Cutting height at 90° mm ........................................................................................................................400
Clearance width mm ..............................................................................................................................590
Parallel cutting width mm .......................................................................................................................300
Parallel stop length mm ..........................................................................................................................650
Bench swing range mm ...................................................................................................degrees -15°/+47°
Cutting speed with 2 switching levels m/min .......................................................................................1200
Weight kg ................................................................................................................................................250
Noise parameters
The noise emission values determined ac-
cording to EN 23746 for the sound level and
according to EN 31202 (coefcient of correction
k3 calculated according to Appendix A.2 of EN
31204) for the sound level at the workplace are
as follows, based on the working conditions
listed in ISO 7904 Appendix A:
Sound level at the workplace in dB
Idle running LpAeq =85 dB(A)
Operation LpAeq = 95 dB(A)
A measurement uncertainty allowance K = 4 dB
applies to the mentioned emission values.
Machine description
Due to its perfected design, the machine offers
a versatile application for processing wood and
plastics in the workshop.
The upper and lower bandwheel is protected
by a xed guard and an articulated cover. Upon
opening the cover, the machine is switched off.
Switching on again is only possible with the co-
ver closed. The non-cutting part of the sawbelt
above the table top is covered by a guard xed
to the sawbelt guide, the latter being protected
against inadvertant opening by the xed guard
of the upper band wheel. The non-cutting part of
the sawbelt under the table top is protected by a
xed cover.
The swivelling range of the table from -15° to
+47°
allows versatile cutting possibilities (e.g)
• Longitudinal cuts
• Crosscuts
• Diagonal cuts
• Curved and irregular cuts
• Cuts for dovetails and tenons
• On-edge cuts of squared beams
Please consult also the working hints in the
operating instructions
General notes
1. After unpacking, check all parts for any trans-
port damage. Inform the supplier immediately
of any faults.
2. Later complaints cannot be considered.
3. Make sure the delivery is complete.
4. Before putting into operation, familiarize your-
self with the machine by carefully reading these
instructions.
5. Use only original scheppach accessories,
wearing or replacement parts. You can nd
replacement parts at your scheppach dealer.
6. When ordering, include our item number
and the type and year of construction of the
machine.
NOTE:
In accordance with valid product liability laws,
the manufacturer of this device shall not be
responsible for damage to and from this device
which results from:
1. Improper care.
2. Noncompliance with the Operating Instruc
tions.
3. Repairs made by unauthorized persons.
4. The installation and use of any parts which
are not original scheppach replacement parts.
5. Improper use and application.
6. Failure the electrical system as a result of
non com pliance with the legal and applicable
electrical directives and VDE regulations
0100, DIN 57113 / VDE 0113.
We recommend that you read through the
entire operating instructions before putting
into operation.
These operating instructions are to assist you
in getting to know your machine and utilize its
proper applications.
The operating instructions contain important
notes on how you work with the machine safely,
expertly, and economically, and how you can
avoid hazards, save repair costs, reduce down-
time and increase the reliability and service life
Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.
Product:
Forumrules
To achieve meaningful questions, we apply the following rules:
First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.
Register
Register getting emails for Scheppach Basa 7.0 at:
new questions and answers
new manuals
You will receive an email to register for one or both of the options.
Get your user manual by e-mail
Enter your email address to receive the manual of Scheppach Basa 7.0 in the language / languages: English, German, Dutch, Danish, French, Italian, Portuguese, Swedish, Spanish, Norwegian, Finnish as an attachment in your email.
The manual is 5.04 mb in size.
You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.
The manual is sent by email. Check your email
If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.
The email address you have provided is not correct.
Please check the email address and correct it.
Your question is posted on this page
Would you like to receive an email when new answers and questions are posted? Please enter your email address.
