781991

Scheppach BAB150-40Li Manual

19
Zoom out
Zoom in
Previous page
1/68
Next page
www.scheppach.com / service@scheppach.com / +(49)-08223-4002-99 / +(49)-08223-4002-58
GB | 19
• Switch off the equipment when not in use.
• Wear gloves
7. Before starting the equipment
Unpack the device and check it for complete delivery
contents and transport damage.
NOTE
The batteries (optional; depending on the delivery
scope) are not fully charged on delivery. Before rst
use, fully charge the batteries. See charger instruc-
tion manual.
Fitting the blower tube (Fig. 2)
• Fit the blast pipe on the outlet opening of the motor
unit.
• Turn the blast pipe to lock it with the bayonet catch
Removing / inserting the battery (Fig. 3)
1. To remove the battery from the appliance, press
the release button (4) on the battery (3) and pull
out the battery.
2. To insert the battery , place it on the guide track
and push it back into the appliance. It will audibly
snap in.
8. Operation
• To switch on, press and hold the On/Off switch (8).
• The airow is variable depending on the setting of
the on/off switch (8)
• To switch off, let go of the On/Off switch.
• For maximum airow, press and hold the turbo but-
ton (3)
ATTENTION: Only use the turbo button (3) with
heavy accumulations (higher battery consumption
and therefore shorter run time of the leaf blower
when the turbo button is pressed)
• To reduce the airow again, release the turbo but-
ton (3)
• Channel the air stream forward and walk slowly to
blow foliage or garden refuse into.
9. Cleaning and maintenance
Before putting away or cleaning , switch off and re-
move the battery pack.
Cleaning
• Regularly check the device before starting work
• Damaged parts have to be repaired or replaced by
an authorised service department before you can
work with the device
• Only ever use original accessories and spare parts.
• Use the device only with batteries and chargers in-
tended for it.
• Do not use the charger if it is damaged.
• Using other components can lead to re.
• Keep all safety devices, air vents and the motor
housing free of dirt and dust as far as possible.
Wipe the equipment with a clean cloth or blow it
down with compressed air at low pressure.
• We recommend that you clean the equipment im-
mediately after you use it.
• Clean the equipment regularly with a damp cloth
and some soft soap. Do not use cleaning agents
or solvents; these may be aggressive to the plastic
parts in the equipment. Ensure that no water can
get into the interior of the equipment. The ingress
of water into an electric tool increases the risk of an
electric shock.
• Use a brush to remove deposits from the safety
guard.
Maintenance
There are no other parts inside the equipment which
require maintenance.
Service information
Please note that the following parts of this product
are subject to normal or natural wear and that the fol-
lowing parts are therefore also required for use as
consumables.
Wear parts*: Nozzle
* Not necessarily included in the scope of delivery!
10. Storage
NOTE
• Store the device in a dry and frost-free (10-25 °C)
place.
• Store the battery and the device separately from
each other.
• Charge the battery before storing it for the winter.
• Keep the device, and its plastic components in
particular, away from brake uid, petrol, products
containing oil, penetrating oil etc. They contain
chemical substances that may damage or destroy
the plastic parts of the device.
• Fertilisers and other garden chemicals contain sub-
stances which can have a heavily corrosive effect
on metal parts. Do not store the device close to
these substances.
11. Disposal and recycling
The equipment is supplied in packaging to prevent it
from being damaged in transit. The raw materials in
this packaging can be reused or recycled. The equip-
ment and its accessories are made of various types
of material, such as metal and plastic. Defective com-
ponents must be disposed of as special waste. Ask
your dealer or your local council.
… 19 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Scheppach BAB150-40Li at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Scheppach BAB150-40Li in the language / languages: English, German, French, Polish as an attachment in your email.

The manual is 4.05 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info